WB16X28654 GE Oven Stove Burner Cap Cover Small
Burner cap cover, small works with some GE, Hotpoint, and RCA models of stoves / ovens / ranges.
Weight : 0.0682 lbs
Dimension : 5.6692 x 3.2677 x 0.5118
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
Burner cap cover, small works with some GE, Hotpoint, and RCA models of stoves / ovens / ranges.
Weight : 0.0682 lbs
Dimension : 5.6692 x 3.2677 x 0.5118
Write Your Own Review
The following parts are replaced by this product
- WB29X24720
1. Unplug the stove from the wall before beginning any repairs.
2. To access the WB16X28654 GE Stove Burner Cap Cover, you may need to remove the burner grates first. Refer to the manufacturer's instructions if necessary.
3. Depending on your model stove, you may need to remove two screws that secure the burner cap cover in place. Locate and remove the screws with a screwdriver.
4. The burner cap cover should come loose after the screws have been removed. Carefully pull it out of the opening.
5. Carefully clean the surface beneath the old burner cap cover before placing the new part in the same area.
6. Line up the new WB16X28654 GE Stove Burner Cap Cover with its corresponding port on the stove and securely press it into place.
7. Reattach the securing screws with a screwdriver.
8. Replace the burner grates if they were removed.
9. Restore power to the stove and test the burner cap cover by turning the burners on to ensure that it is working properly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
2. To access the WB16X28654 GE Stove Burner Cap Cover, you may need to remove the burner grates first. Refer to the manufacturer's instructions if necessary.
3. Depending on your model stove, you may need to remove two screws that secure the burner cap cover in place. Locate and remove the screws with a screwdriver.
4. The burner cap cover should come loose after the screws have been removed. Carefully pull it out of the opening.
5. Carefully clean the surface beneath the old burner cap cover before placing the new part in the same area.
6. Line up the new WB16X28654 GE Stove Burner Cap Cover with its corresponding port on the stove and securely press it into place.
7. Reattach the securing screws with a screwdriver.
8. Replace the burner grates if they were removed.
9. Restore power to the stove and test the burner cap cover by turning the burners on to ensure that it is working properly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
