WB16X28252 GE Oven Range Burner Cap Inner
Burner cap inner works with some GE, and Hotpoint models of stoves / ovens / ranges.
Weight : 0.1295 lbs
Dimension : 8 x 7.5 x 0.3
Burner cap inner works with some GE, and Hotpoint models of stoves / ovens / ranges.
Weight : 0.1295 lbs
Dimension : 8 x 7.5 x 0.3
Write Your Own Review
DIY Guide to Replacing the WB16X28252 GE Range Burner Cap Inner
Replacing the burner cap inner on a GE range can be a relatively simple process, and should only take a few minutes. With a few basic tools, you can have your stovetop running in no time. Follow these steps to replace the WB16X28252 GE Range Burner Cap Inner:
Step 1: Prepare the Tools
Gather the following tools before beginning the repair process:
• Screwdriver
• New WB16X28252 GE Range Burner Cap Inner
Step 2: Remove the Old Burner Cap Inner
• Using a screwdriver, carefully remove any screws or fasteners holding the old burner cap inner in place.
• Carefully pull away the old burner cap inner from the stove top.
Step 3: Install the New Burner Cap Inner
• Position the new WB16X28252 GE Range Burner Cap Inner in place.
• Secure the new part by re-installing any screws that were removed in Step 2.
Step 4: Test the Repair
Once you’ve finished replacing the burner cap inner, it’s important to test the repair before using the stove top.
• Turn the stove top burner on the lowest setting.
• Wait a few minutes to make sure that the burner cap inner is heating up evenly.
• If the heat is not distributed evenly, you may need to adjust the burner cap inner slightly.
And there you have it! Following these simple instructions, you can replace the WB16X28252 GE Range Burner Cap Inner quickly and easily.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Replacing the burner cap inner on a GE range can be a relatively simple process, and should only take a few minutes. With a few basic tools, you can have your stovetop running in no time. Follow these steps to replace the WB16X28252 GE Range Burner Cap Inner:
Step 1: Prepare the Tools
Gather the following tools before beginning the repair process:
• Screwdriver
• New WB16X28252 GE Range Burner Cap Inner
Step 2: Remove the Old Burner Cap Inner
• Using a screwdriver, carefully remove any screws or fasteners holding the old burner cap inner in place.
• Carefully pull away the old burner cap inner from the stove top.
Step 3: Install the New Burner Cap Inner
• Position the new WB16X28252 GE Range Burner Cap Inner in place.
• Secure the new part by re-installing any screws that were removed in Step 2.
Step 4: Test the Repair
Once you’ve finished replacing the burner cap inner, it’s important to test the repair before using the stove top.
• Turn the stove top burner on the lowest setting.
• Wait a few minutes to make sure that the burner cap inner is heating up evenly.
• If the heat is not distributed evenly, you may need to adjust the burner cap inner slightly.
And there you have it! Following these simple instructions, you can replace the WB16X28252 GE Range Burner Cap Inner quickly and easily.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
