Whirlpool Appliance Parts

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

This Ductless Downdraft Vent Kit, Black can be used when venting your appliance where venting to the outside is either not possible or not desirable in the kitchen. This kit c ...ontains a filter housing that attaches to the blower under the unit; the filter cleans the air before it re-enters the home. This accessory can be used with several brands; check to see if your model number is compatible. Measures approximately 20"L x 13"W x 12"H. Installing this accessory will require basic hand tools and novice repair experience. Remember to turn off the appropriate circuit breaker before installing this part. Helpful Tip: Change the filter every 6 months or when a loss of airflow can be detected. (Filter Part number W10177003)Part Specification•  This product is a Factory Certified Accessory. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications•  Package contains (1) Ductless Downdraft Vent Kit, Black•  No tools required for installation Read More Read Less

This Gas Range Surface Burner Valve controls the flow of gas to the surface burner on your range. Once this valve senses the desired heat, it will open up and allow the gas to ... travel to the oven burner. If you are no longer getting heat to the burners, you may need to replace the valve. Installing this part will require specialized tools, complicated disassembly of the oven and prior repair experience. We recommend that you hire a qualified technician to install this assembly. If installing yourself, remember to unplug the oven or shut off the house circuit breaker and gas valve for the appliance before beginning.Part Specification•  This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications•  This product is a replacement part•  Package contains (1) Gas Range Surface Burner Valve•  Tools Needed: Specialized Tools Read More Read Less

The Gas Dryer Valve Coil opens the gas valves while the dryer is running. If gas isn't flowing and your dryer has no heat, or it's cycling on and off repeatedly, replacing the ... coil may alleviate these issues. This set has a boost hold coil (3 prong) and secondary coil (2 prong). You can use a multimeter or VOM to test your coils to see if they are functioning properly. To access the part, remove the small access panel at the bottom front of the dryer. Replacing this part will require basic hand tools, some disassembly of the dryer and novice repair experience. You must unplug the appliance or shut off the house circuit breaker before installing this part. Also be sure to turn off the gas valve that’s connected to your dryer.Part Specification•  This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications•  This product is a replacement part•  Package contains (1) Gas Dryer Valve Coil Set•  Tools Needed: Multi screwdriver Read More Read Less

The French Door Refrigerator Wire Harness supplies power to the evaporator motor of the appliance. If your refrigerator isn’t cooling properly or the fan isn’t blowing coo ...l air, replacing this part could alleviate these issues. Use a multi-meter (item 430572) to test the fan motor, electronic control board and wiring harness to determine which part is malfunctioning before you begin the repair. Installing this part will require basic hand tools, some disassembly of the refrigerator and novice repair experience. Remember to unplug the refrigerator or shut off the house circuit breaker for the appliance before installing this part. Helpful Tips: Take a digital photo of the existing wire harness before you remove it to aid with the installation of the new part.Part Specification•  This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications•  This product is a replacement part•  Package contains (1) French Door Refrigerator Wire Harness•  Tools Needed: Multi screwdriver Read More Read Less

This Range Element Receptacle and Wire Kit connects the surface elements of your range to the wiring harness. This kit includes (2) brackets (you'll only use one that matches ...your receptacle),(2) wires, (2) wire nuts, (2) pieces of heat-shrink wrap, and the receptacle. If your element is not heating, the connections may have shorted out. To access the part, remove the element that isn't working properly from your range, and the drip pan. Lift the top of the range and unscrew the old receptacle block. Replacing this part will require basic hand tools, some disassembly of the range and novice repair experience. You must unplug the range or shut off the house circuit breaker for the appliance before installing this part. Recommended Item: Wire Splicing Tool, 8-1/4". This stripper specializes in stripping and cutting wire. This tool is designed with a lean nose for pulling and looping wire and equipped with precision ground cutters.Part Specification•  This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications•  This product is a replacement part•  Package contains (1) Range Element Receptacle and Wire Kit•  Tools Needed: Multi screwdriver, wire strippers, heat gun Read More Read Less

This Range Element Receptacle and Wire Kit connects the surface elements of your range to the wiring harness. This kit includes (2) brackets (you'll only use one that matches ...your receptacle), (2) wires, (2) wire nuts, (2) pieces of heat-shrink wrap, and the receptacle. If your element is not heating properly or works intermittently, replacing this part may alleviate these issues. To access the part, remove the element that isn't working properly from your range, and the drip pan. Lift the top of the range and unscrew the old receptacle block. Replacing this part will require basic hand tools, some disassembly of the appliance and novice repair experience. You must unplug the appliance or shut off the house circuit breaker before installing this part.Part Specification•  This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications•  This product is a replacement part•  Package contains (1) Range Element Receptacle and Wire Kit•  Tools Needed: Multi screwdriver Read More Read Less

Vent damper works with some Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models of microwaves.

This Gas Range Surface Burner Base distributes the gas through holes or slots to create an even flame across the cooking area. Caution: the wires must be handled with care; en ...sure that they don't fall down inside the appliance after you remove the old burner head. Installing this item will require basic hand tools, some disassembly of the range and novice repair experience. Remember to unplug the range or shut off the house circuit breaker for the appliance before installing this item. Also make sure to turn off the gas valve before the repair.Part Specification•  This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications•  This product is a replacement part•  Package contains (1) Gas Range Surface Burner Base•  Tools Needed: Multi screwdriver Read More Read Less

This Range Sealed Gas Burner Head Assembly directs your oven's gas to the burner head. If the ceramic is cracked on your range or if the burner no longer ignites, replacing th ...is part may alleviate these issues. To install the new part, remove the old burner assembly by turning it counter clockwise by hand. If you are unable to loosen the old burner by hand, using a strap wrench may help. When you remove the ground and the spark wires from the old burner head, make sure they don't fall back into the range top. Turn the new burner head clockwise to lock when replacing. Replacing this part will require no disassembly or repair experience. You must unplug the appliance or shut off the house circuit breaker before installing. Also turn off the gas supply that's connected to your range.Part Specification•  This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications•  This product is a replacement part•  Package contains (1) Range Sealed Gas Burner Assembly•  No tools required for installation Read More Read Less