Whirlpool Appliance Parts

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

The Gas Dryer Igniter Kit is a flat-style igniter assembly that can be used to replace both a round or flat igniter in your appliance. The igniter lights the gas burner to hea ...t the appliance during the drying cycle. This kit includes (1) igniter assembly, (1) bracket, (2) wire nuts, (1) bolt and installation instructions. Note that the igniter is very fragile and must be handled with care. You'll remove the top and front panels of the dryer to access the part. Replacing this assembly will require basic hand tools, some disassembly of the dryer and novice repair experience. You must unplug the dryer or shut off the house circuit breaker for the appliance before installing this part.Part Specification•  This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications•  This product is a replacement part•  Package contains (1) Gas Dryer Igniter Kit•  Tools Needed: Multi screwdriver, putty knife Read More Read Less

The Dishwasher Rinse Aid Cap is part of the detergent dispenser and releases the appliance’s rinse aid during the cleaning cycle. If the detergent assembly of your dishwashe ...r does not dispense the rinse aid properly or your appliance’s current dispenser cap is broken or lost, you can easily replace it with this item. This part measures approximately 1-1/2" D and is blue in color. Note that if your original cap was larger in diameter than this item, you will need to replace the entire dispenser assembly. Installing this part will require no disassembly or repair experience. Remember to unplug the dishwasher or shut off the house circuit breaker for the appliance before installing this part. Helpful Tip: We also recommend using affresh® Dishwasher Cleaner (item W10282479) to help remove limescale and mineral build-up that can be unsightly and affect your dishwasher’s performance. *affresh® brand products are owned and distributed by Whirlpool Corporation.Part Specification•  This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications•  This product is a replacement part•  Package contains (1) Dishwasher Rinse Aid Cap•  No tools required for installation Read More Read Less

The Refrigerator Water Filter Cap in black is located at the base of the refrigerator. After extracting the water filter, remove the filter cap by turning it counter clockwise .... Install the new cap turning it clockwise and locking it into place. When replaced, purge the air out of the water lines and check that your refrigerator's water dispenses properly. Replacing this part will require no disassembly or repair experience.Part Specification•  This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications•  This product is a replacement part•  Package contains (1) Refrigerator Water Filter Cap•  No tools required for installation Read More Read Less

The Refrigerator Water Filter Housing is a white plastic part that surrounds and protects the appliance’s water filter. This cover measures approximately 4" x 13" and is des ...igned to be used with many refrigerator brands; check to see if your model number is compatible. To remove the existing cover, press the forward tab to release the front of the part and then flex the mounting pins at the back of the cover. To install the new part, connect the right rear pin first, then secure the left pin and snap the front tab into place. Replacing this part will not require tools, disassembly of the refrigerator or repair experience. You must unplug the refrigerator or shut off the house circuit breaker for the appliance before installing this part. Also turn off the refrigerator’s water supply before you begin.Part Specification•  This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications•  This product is a replacement part•  Package contains (1) Refrigerator Water Filter Housing•  Tools Needed: Multi screwdriver Read More Read Less

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

The Range Bake Igniter glows white-hot to heat properly, and lives behind the access panel at the rear of your oven. If the igniter in your oven is glowing red or orange, or n ...ot glowing at all, it may be weak and needs to be replaced. The new igniter may not have connections attached to its wire ends, so you'll have to cut the connections off of the old igniter, strip the wires, and use the included wire nuts with the new igniter. Installing this part will require basic hand tools, some disassembly of the oven and novice repair experience. You should unplug the appliance or shut off the house circuit breaker for the appliance before installing this part. Also be sure to turn the gas valve off before installing this part.Part Specification•  This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications•  This product is a replacement part•  Package contains (1) Range Bake Igniter•  Tools Needed: Multi screwdriver, wire splicing tool Read More Read Less

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

This Gas Range Surface Igniter provides spark to the burner to ignite the gas and initiate the cooking process. This igniter features a spark electrode with a male spade conne ...ction. If your range’s igniter is no longer providing a spark to light the burner, the wire may be shorted out or the porcelain casing may be cracked. Replacing the part may alleviate these issues. Be mindful not to lose the two burner wires inside the appliance when you detach them from the old burner head. To install the new part, simply insert it into the burner head and secure it with two screws. Replacing this part will require basic hand tools, some disassembly of the range and novice repair experience. You must unplug the range or shut off the house circuit breaker for the appliance before installing this part. Also make sure you shut off the gas to the range.Part Specification•  This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications•  This product is a replacement part•  Package contains (1) Gas Range Surface Igniter•  Tools Needed: Multi screwdriver, strap wrench Read More Read Less

The Refrigerator Emitter Cover is located in the top left portion of the freezer and shields the emitter control board while housing the flipper cover for the emitter board. T ...he flipper cover isn't included with the emitter cover and must be ordered separately if needed. On the backside of the emitter assembly, there is a pin you'll have to remove. Use a small flat blade screwdriver to pry off the retaining clip and remove the pin. Replacing this part will require basic hand tools, some disassembly of the refrigerator and novice repair experience. You must unplug the refrigerator or shut off the house circuit breaker for the refrigerator before installing this part.Part Specification•  This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications•  This product is a replacement part•  Package contains (1) SxS Refrigerator Emitter Cover•  Tools Needed: Multi screwdriver Read More Read Less