Maytag Appliance Parts Valve & Float

This Top Load Washer Dual Water Inlet Valve allows hot and cold water to fill in the washer during the cleaning cycle. If your washer isn’t receiving the proper amounts of c ...old and/or hot water, one or more of the solenoids in the current valve may have failed. You may also need to replace this part if you find that your washer is filling slowly, not filling at all or leaking cold water onto the floor. Replacing this part will require basic hand tools, some disassembly of the washing machine and novice repair experience. You must unplug the washing machine or shut off the house circuit breaker for the appliance before installing this part. Also make sure you turn off the hot and cold water supplies. Recommended Item: Consider replacing the Fill Hose (item 8212487RP) at the same time you complete this repair. Helpful Tip: We also recommend using affresh® Washing Machine Cleaner* (item W10501250) once a month to help reduce odor-causing residue that can build up in your washing machine's drain without proper care. *affresh® brand products are owned and distributed by Whirlpool Corporation.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Top Load Washer Water Inlet Valve• Tools Needed: Multi screwdriver, standard pliers Read More Read Less

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

The Dishwasher Water Inlet Valve allows the appliance to fill with water and complete the cleaning cycle. If your dishwasher won't fill properly or overflows and leaks water o ...n the floor, then the water valve may be restricted or damaged and will need replacement. Note that if the dishwasher is underfilling, it will most likely exhibit poor wash performance. This 7-watt, 120-volt coil, 3/8" brass inlet water valve includes the mounting bracket. Installing this part will require basic hand tools, some disassembly of the dishwasher and novice repair experience. Remember to unplug the dishwasher or shut off the house circuit breaker for the appliance before installing this part. Also be sure to turn off the water supply to your dishwasher before you begin. Note that you will need to reuse the brass fitting from the existing part with the new valve; use pipe joint compound to securely attach it to the new part. Helpful Tip: We also recommend using affresh® Dishwasher Cleaner (item W10282479) to help remove limescale and mineral build-up that can be unsightly and affect your dishwasher’s performance. *affresh® brand products are owned and distributed by Whirlpool Corporation.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Dishwasher Water Inlet Valve• Tools Needed: Multi screwdriver Read More Read Less

The SxS Refrigerator Water Inlet Valve allows water to enter the refrigerator’s water dispenser and ice maker. The package includes the new water valve, instructions, ¼" tu ...bing and a plastic ¼" coupler. Replacing this part will require basic hand tools, some disassembly of the refrigerator and intermediate repair experience. You must unplug the refrigerator or shut off the house circuit breaker for the appliance before installing this part. Also turn off the refrigerator’s water supply before you begin. Helpful Tip: We do not recommend taking apart your appliance’s current water inlet valve to clean it, due to the risk of failure after the disassembly.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) SxS Refrigerator Water Inlet Valve• Tools Needed: Multi screwdriver Read More Read Less

The SxS Refrigerator Water Inlet Valve allows water to enter the refrigerator’s water dispenser and ice maker. The package includes the new inlet water valve, instructions, ...¼" tubing and a plastic ¼" coupler. If water isn't entering the ice maker and dispenser in your appliance, replacing this part may alleviate the issue. The new part's wire connections are on the back of the unit and the valve includes a "push to lock" fitting that doesn't require a nut to attach the tubing. You'll have to remove the old style compression fittings around the water line and trim, then push the water line directly into the valve where it will lock into place. Replacing this part will require basic hand tools, some disassembly of the appliance and novice repair experience. You must unplug the appliance or shut off the house circuit breaker before installing this part. Also turn off the refrigerator's water supply before you begin.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) SxS Refrigerator Water Inlet Valve• Tools Needed: Multi screwdriver, 4" wrench, standard pliers and nut driver Read More Read Less

This Top Load Washer Water Inlet Valve Assembly allows hot and cold water to fill in the washer. If your washer isn't filling or water is leaking out onto the floor, you may n ...eed to replace this part. To access the part, you'll remove the fill hoses from the back of the machine and then remove the back access panel. This assembly includes the water inlet valve, vacuum break, wire harness and connector hose. Replacing this part will require basic hand tools, some disassembly of the washing machine and novice repair experience. You must unplug the washing machine or shut off the house circuit breaker for the appliance before installing this part. Also make sure you turn off the hot and cold water supplies. Recommended Item: Consider replacing the hot and cold Fill Hoses (item 8212487RP) at the same time as this repair. Helpful Tip: We also recommend using affresh® Washing Machine Cleaner* (item W10501250) once a month to help reduce odor-causing residue that can build up in your washing machine's drain without proper care. *affresh® brand products are owned and distributed by Whirlpool Corporation.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Front Load Washer Water Inlet Valve• Tools Needed: Multi screwdriver, putty knife, pliers Read More Read Less

W11082871 is an original equipment manufactured (OEM) part. Ensure your dishwasher operates at peak efficiency with the reliable inlet valve replacement from Whirlpool. Design ...ed for various household brands, this valve is compatible with Admiral, Amana, Jenn-Air, Kenmore, Kitchenaid, Magic Chef, Maytag, Norge, Roper, and Whirlpool dishwashers. Crafted to meet strict quality standards, the valve functions to regulate water flow, preventing leaks and ensuring optimal performance during wash cycles. Whether you're performing routine maintenance or replacing a faulty component, this part offers a seamless fit and easy installation. Keep your dishwasher running smoothly and extend its lifespan with this essential component. Trust Whirlpool for durable and high-quality appliance parts that you can depend on. Read More Read Less

WPL W11316255 has been replaced by WPL W11688994. This washer water inlet valve (double) is a genuine OEM (Original Equipment Manufacturer) part that controls water flow into ...the washing machine. It regulates the intake of hot and cold water, ensuring the proper amount is used during each cycle. Read More Read Less

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.