Maytag Appliance Parts

This Dryer Thermal Cut Off Fuse is a safety device designed to protect the dryer from overheating. A multimeter can be used to test the fuse. Always check the dryer venting wh ...en replacing a blown thermal fuse. The thermal cut off is located on top of the burner funnel under the dryer drum, so you'll need to remove the drum from the dryer cabinet to access the old part and replace it. Replacing this part will require basic hand tools, some disassembly of the dryer and novice repair experience. You must unplug the dryer or shut off the house circuit breaker for the appliance before installing this part.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Dryer Thermal Cut Off Fuse• Tools Needed: Multi screwdriver, putty knife, 5/16" nut driver Read More Read Less

W11598145 is an original equipment manufactured (OEM) part. Enhance the performance of your refrigerator with this high-quality inverter box designed specifically for reliable ... operation within various models. Crafted by Whirlpool, this durable circuit board, timer, and overlay are engineered for compatibility with a range of leading brands including Admiral, Amana, Jenn-Air, Kenmore, Kitchenaid, Magic Chef, Maytag, Norge, Roper, and Whirlpool. Whether you are troubleshooting an appliance issue or conducting a routine maintenance check, this inverter box ensures optimal functionality, contributing to energy efficiency and proper temperature control. Its straightforward installation process makes it a valuable addition to your refrigerator repair toolkit. Invest in reliability and quality, and ensure your refrigerator runs smoothly for years to come with this essential replacement part. Read More Read Less

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

The Dryer Lint Screen is a white screen that provides proper air flow and operation of your dryer by trapping lint and debris from the exhaust air flowing from the dryer. Afte ...r pulling the old filter out, be sure to clean the channels of the lint housing before inserting the new lint screen. The filter should be cleaned before every load of laundry and replaced immediately if damaged. This a replacement lint filter with handle measures approximately 3/8" thick on the left side and 5/8" thick on the right side. Replacing your dryer’s lint filter is a quick and essential way to keep your appliance operating at optimal levels. Installing this part requires no tools, disassembly or repair experience. Recommended Tool: The Cleaning Brush (item 4210463RW) is useful to remove lint and other debris from the dryer’s venting.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Dryer Lint Screen• No tools required for installation Read More Read Less

This Washer Water Inlet Valve Assembly helps to control and balance the water temperature flowing into the washer tub by controlling the water flow into the washer. This assem ...bly includes the cold water inlet valve, hot water inlet valve, wire harness and housing. If your washer isn't filling with water as expected, replacing this part may alleviate the issue. Replacing this part will require basic hand tools, some disassembly of the washer and novice repair experience. You must unplug the washing machine or shut off the house circuit breaker for the appliance before installing this part. Also make sure you turn off the hot and cold water supplies. Helpful Tip: We also recommend using affresh® Washing Machine Cleaner Tablets* (item W10501250) once a month to help reduce odor-causing residue that can build up in your washing machine's drain without proper care. *affresh® brand products are owned and distributed by Whirlpool Corporation.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Washer Water Inlet Valve Assembly• Tools Needed: Multi screwdriver, 10" V-Jaw Tongue & Groove Pliers, tape, putty knife, standard pliers, nylon lanyard Read More Read Less

This Range Inner Oven Door Glass is a replacement part that replaces the heat-resistant inner glass panel of your oven’s door window. This glass provides heat protection and ... allows you to view food items as they cook in the oven. Replacing this part will require basic hand tools, some disassembly of the oven and novice repair experience. You must unplug the oven or shut off the house circuit breaker for the oven before installing this part. Caution: the oven door may feel heavy; 2 or more people may be required to safely lift the oven door to replace the inner glass. Handle replacement glass with care to avoid breakage.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Range Inner Oven Door Glass• Tools Needed: Multi screwdriver Read More Read Less

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

This Front Load Washer Water Inlet Valve lets the hot and cold water into your washing machine and distributes it around to the dispensers. If the valve is leaking or your app ...liance isn't filling with water as expected, replacing this part may alleviate these issues. Please note: The valve should never be disassembled and cleaned, only replaced. Replacing this part will require basic hand tools, some disassembly of the appliance and novice repair experience. You must unplug the appliance or shut off the house circuit breaker before installing this part. Also make sure you turn off the hot and cold water supplies. Helpful Tip: We also recommend using affresh® Washing Machine Cleaner Tablets* (item W10135699) once a month to help reduce odor-causing residue that can build up in your washing machine's drain without proper care. *affresh® brand products are owned and distributed by Whirlpool Corporation.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Front Load Washer Water Inlet Valve• Tools Needed: Multi screwdriver, standard pliers, torque 20 wrench, 10" V-Jaw tongue & groove pliers Read More Read Less

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

The Dryer Start Switch is a 2-terminal push-to-start switch that initiates the drying cycle. If the current start switch of your appliance is no longer functioning properly, t ...he dryer will not start. To determine if the original part is defective before you begin the repair, use a multimeter to test for continuity. Installing this part will require basic hand tools, minor disassembly of the dryer and novice repair experience. You must unplug the dryer or shut off the house circuit breaker for the appliance before installing this part.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Dryer Start Switch• Tools Needed: Multi screwdriver Read More Read Less