Kitchenaid Appliance Parts

KitchenAid Batch Feed Garbage Disposal MultiGrind Plus Technology features four grinding components that work together to handle anything from cornhusks to celery The J ...am-Sensor Circuit automatically senses, then breaks through the toughest jams before you even notice a problem SoundSeal Plus Technology combines four advanced sound-reducing components to make this disposer 60% quieter than a standard disposer Batch feed system operates when the cover is inserted into the mouth of the disposer by turning the stopper to the left or right Corrosion-resistant grind and drain chambers ensure lasting quality Stainless steel shredder ring and grinding wheel add strength and provide longer disposer life Read More Read Less

The Gas Dryer Igniter lights the gas in your dryer. If your dryer is no longer supplying heat, this part may be damaged or cracked and may need to be replaced. To access the p ...art, lift the top of the dryer by releasing the spring clips from the top panel with a putty knife. Then remove the door switch wires and the screws that release the front panel. Next, simply loosen the screw that holds in the igniter to remove it. Please note that the bracket is no longer included with this part. If your original igniter was round, also order bracket (item 37001309). Replacing this assembly will require basic hand tools, some disassembly of the dryer and novice repair experience. You must unplug the dryer or shut off the house circuit breaker for the appliance before installing this part. Note that you cannot touch the grey part of the igniter; only handle the igniter by its white plastic covering.Part Specification•  This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications•  This product is a replacement part•  Package contains (1) Gas Dryer Igniter Kit•  Tools Needed: Multi screwdriver, putty knife, 5/16" wrench Read More Read Less

The Range Bake Igniter glows white-hot to heat properly, and lives behind the access panel at the rear of your oven. If the igniter in your oven is glowing red or orange, or n ...ot glowing at all, it may be weak and needs to be replaced. The new igniter may not have connections attached to its wire ends, so you'll have to cut the connections off of the old igniter, strip the wires, and use the included wire nuts with the new igniter. Installing this part will require basic hand tools, some disassembly of the oven and novice repair experience. You should unplug the appliance or shut off the house circuit breaker for the appliance before installing this part. Also be sure to turn the gas valve off before installing this part.Part Specification•  This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications•  This product is a replacement part•  Package contains (1) Range Bake Igniter•  Tools Needed: Multi screwdriver, wire splicing tool Read More Read Less

This Gas Range Surface Igniter provides spark to the burner to ignite the gas and initiate the cooking process. This igniter features a spark electrode with a male spade conne ...ction. If your range’s igniter is no longer providing a spark to light the burner, the wire may be shorted out or the porcelain casing may be cracked. Replacing the part may alleviate these issues. Be mindful not to lose the two burner wires inside the appliance when you detach them from the old burner head. To install the new part, simply insert it into the burner head and secure it with two screws. Replacing this part will require basic hand tools, some disassembly of the range and novice repair experience. You must unplug the range or shut off the house circuit breaker for the appliance before installing this part. Also make sure you shut off the gas to the range.Part Specification•  This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications•  This product is a replacement part•  Package contains (1) Gas Range Surface Igniter•  Tools Needed: Multi screwdriver, strap wrench Read More Read Less

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

This Top Load Washer Bearing Replacement Tool Kit is needed to repair install the bearing, shaft, and seal kit. Which is used on Whirlpool® and Kenmore® washing machines. Wh ...en replacing this part, if you see that your motor stator is broken, check your model number to confirm compatibility. Please remember to unplug the washer or shut off the breaker for the appliance before installing this part.Part Specification•  This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications•  This product is a replacement part•  Package contains (1) Top Load Washer Tub Bearing and Drive Shaft Kit•  Tools Needed: Specialized Tools Read More Read Less

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

This Disposer Splash Guard is made of durable black plastic and is used to keep debris from exiting the disposal during the grinding process. If the current splash guard in yo ...ur appliance is torn, damaged or missing, replacing this accessory may alleviate these issues. This is a universal part that can be used across several brands; check to see if your model number is compatible. Installing this accessory will require basic hand tools, some disassembly of the disposal and novice repair experience. You must shut off the house circuit breaker for the appliance before installing this part. Helpful Tip: We also recommend using affresh® Disposal Cleaner Tablets* (item W10509526) to clean and help reduce odor-causing residues from your garbage disposal. *affresh® brand products are owned and distributed by Whirlpool Corporation.Part Specification•  This product is a Factory Certified Accessory. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications•  This product is a universal accessory item compatible with several brands•  Package contains (1) Garbage Disposal Splash Guard•  Tools Needed: Multi screwdriver Read More Read Less

Use this Vacuum Crevice Wand to remove lint from your dryer's lint screen (for models where the screen is in the front of the dryer) and to clean your refrigerator coils or an ...y other hard to reach areas. Note that cleaning your refrigerator’s coils is part of regular maintenance for most refrigerators. Using this crevice wand once a month to remove dust and other airborne particles on your refrigerator's condenser coils may, ensure proper performance and extend the life of your refrigerator. This is an accessory that can be used with most 1-1/4" vacuums; check to see if your model number is compatible. Size: 37" L x 2" W x 1-1/2" D. Using this accessory will require no disassembly or repair experience.Part Specification•  This product is a Factory Certified Accessory. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications•  Package contains (1) Vacuum Crevice Wand•  No tools required for installation Read More Read Less