WPW10571946 Whirlpool Manifold

DIY Step-By-Step Guide to Replacing the WPW10571946 Whirlpool Manifold

1. Turn off power to the appliance by unplugging it or flipping the circuit breaker.

2. Disconnect the fill hoses and drain hose from the manifold.

3. Remove the two screws that hold the manifold onto the washer cabinet.

4. Take out the old manifold and replace it with the new WPW10571946 Whirlpool manifold.

5. Reconnect the fill hoses and drain hose to the new manifold.

6. Secure the new manifold to the washer cabinet with the screws.

7. Turn the power back on and test the new manifold for leaks.

Following these steps will help ensure a successful replacement of the WPW10571946 Whirlpool Manifold. Please keep in mind that any repairs should be done with utmost caution, so as not to damage any components of the washing machine.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.