WPW10356019 Whirlpool Drip Tray
The Top Freezer Refrigerator Drip Tray catches water that drips from the dispenser during use. This grey plastic part simply slides into place under the dispenser. Installing this part requires no disassembly of the appliance and no repair experience.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Top Freezer Refrigerator Drip Tray
• No tools required for installation
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Top Freezer Refrigerator Drip Tray
• No tools required for installation
Weight : 0.0576 lbs
Dimension : 3.5 x 1.5 x 1
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
The Top Freezer Refrigerator Drip Tray catches water that drips from the dispenser during use. This grey plastic part simply slides into place under the dispenser. Installing this part requires no disassembly of the appliance and no repair experience.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Top Freezer Refrigerator Drip Tray
• No tools required for installation
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Top Freezer Refrigerator Drip Tray
• No tools required for installation
Weight : 0.0576 lbs
Dimension : 3.5 x 1.5 x 1
Write Your Own Review
The following parts are replaced by this product
- W10356019
How to Replace the Whirlpool WPW10356019 Tray-Drip
Replacing the tray-drip on your Whirlpool WPW10356019 refrigerator can be done in minutes with a few simple steps. Follow this DIY guide to learn how to safely and easily replace the tray-drip on your Whirlpool WPW10356019 refrigerator.
Tools and Materials Needed:
New tray-drip
Phillips screwdriver
Step 1: Unplug the refrigerator from the wall outlet.
Step 2: Open the door to the refrigerator and remove all items from the freezer.
Step 3: Use a Phillips screwdriver to remove the screws that are holding the ice maker in place. Once the screws have been removed, you can gently pull out the ice maker.
Step 4: Locate the tray-drip underneath the ice maker. Carefully remove the old tray-drip and discard it.
Step 5: Take the new tray-drip and carefully slide it into the same position as the old one. Secure the new tray-drip with the previously removed screws.
Step 6: Reinstall the ice maker by sliding it back into its original position. Secure it with the screws that you previously removed.
Step 7: Plug the refrigerator back into the wall outlet.
Your Whirlpool WPW10356019 refrigerator is now ready for use with the new tray-drip installed. With careful attention to detail, you were able to successfully replace the tray-drip on your Whirlpool WPW10356019 refrigerator.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Replacing the tray-drip on your Whirlpool WPW10356019 refrigerator can be done in minutes with a few simple steps. Follow this DIY guide to learn how to safely and easily replace the tray-drip on your Whirlpool WPW10356019 refrigerator.
Tools and Materials Needed:
New tray-drip
Phillips screwdriver
Step 1: Unplug the refrigerator from the wall outlet.
Step 2: Open the door to the refrigerator and remove all items from the freezer.
Step 3: Use a Phillips screwdriver to remove the screws that are holding the ice maker in place. Once the screws have been removed, you can gently pull out the ice maker.
Step 4: Locate the tray-drip underneath the ice maker. Carefully remove the old tray-drip and discard it.
Step 5: Take the new tray-drip and carefully slide it into the same position as the old one. Secure the new tray-drip with the previously removed screws.
Step 6: Reinstall the ice maker by sliding it back into its original position. Secure it with the screws that you previously removed.
Step 7: Plug the refrigerator back into the wall outlet.
Your Whirlpool WPW10356019 refrigerator is now ready for use with the new tray-drip installed. With careful attention to detail, you were able to successfully replace the tray-drip on your Whirlpool WPW10356019 refrigerator.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
