WPW10153532 Whirlpool Adjuster
The Dishwasher Rack Adjuster with Wheels, Right Side connects to the right hand side of the top dishrack. It is used to change the height of the upper rack. If a wheel bracket breaks, the dishwasher will sag to one side. Replacing this part will require basic hand tools, some disassembly of the dishwasher and novice repair experience. Recommended Items: Dishwasher Rack Adjuster with Wheels, Left Side (item WPW10153530). Helpful Tip: We also recommend using affresh® Dishwasher Cleaner (item W10282479) to help remove limescale and mineral build-up that can be unsightly and affect your dishwasher’s performance. *affresh® brand products are owned and distributed by Whirlpool Corporation.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Dishwasher Rack Adjuster with Wheels, Right Side
• Tools Needed: Multi screwdriver
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Dishwasher Rack Adjuster with Wheels, Right Side
• Tools Needed: Multi screwdriver
Weight : 0.8794 lbs
Dimension : 9.92 x 9.41 x 1.3
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
The Dishwasher Rack Adjuster with Wheels, Right Side connects to the right hand side of the top dishrack. It is used to change the height of the upper rack. If a wheel bracket breaks, the dishwasher will sag to one side. Replacing this part will require basic hand tools, some disassembly of the dishwasher and novice repair experience. Recommended Items: Dishwasher Rack Adjuster with Wheels, Left Side (item WPW10153530). Helpful Tip: We also recommend using affresh® Dishwasher Cleaner (item W10282479) to help remove limescale and mineral build-up that can be unsightly and affect your dishwasher’s performance. *affresh® brand products are owned and distributed by Whirlpool Corporation.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Dishwasher Rack Adjuster with Wheels, Right Side
• Tools Needed: Multi screwdriver
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Dishwasher Rack Adjuster with Wheels, Right Side
• Tools Needed: Multi screwdriver
Weight : 0.8794 lbs
Dimension : 9.92 x 9.41 x 1.3
Write Your Own Review
The following parts are replaced by this product
- 99003009
- 99003585
- W10153532
DIY Guide to Replacing the Whirlpool WPW10153532 Adjuster
The Whirlpool WPW10153532 adjuster is an important component of your washing machine that helps to maintain the right water level during a cycle. If it stops working or malfunctions, you will need to replace it as soon as possible. To help you out, here is a DIY guide on how to replace the Whirlpool WPW10153532 adjuster.
Tools and Materials Needed:
• Phillips head screwdriver
• New Whirlpool WPW10153532 adjuster
• Pliers
Step 1: Disconnect the Washing Machine from Power Source
Before getting started, make sure that you disconnect your washing machine from the power source. This can be done by unplugging the power cord from the outlet.
Step 2: Remove the Lid and Access the Adjuster
Next, you will need to remove the lid in order to access the adjuster. This can be done by using a Phillips head screwdriver to unscrew the screws from the inside of the lid.
Step 3: Unscrew the Adjuster and Remove it
Once the lid is removed, you can access the adjuster. Use a pair of pliers to unscrew the adjuster and remove it. Make sure to keep the old adjuster as you may need to refer to it when installing the new one.
Step 4: Install the New Adjuster
Now you will need to take the new adjuster and begin to install it. First, make sure that it is lined up properly and then use the pliers to screw it into the correct position. Once it is secure, you can go ahead and reinstall the lid.
Step 5: Test the New Adjuster
Before powering on your machine, it is important to test the new adjuster to make sure that it is working correctly. To do this, fill up the washing machine with water to the desired level and then adjust the settings to lower the water level. This should cause the adjuster to kick in and redirect the flow of water.
Conclusion
Replacing the Whirlpool WPW10153532 adjuster isn’t too difficult if you follow the steps outlined in this guide. As long as you have the necessary tools and materials, anyone can do it! Good luck!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
The Whirlpool WPW10153532 adjuster is an important component of your washing machine that helps to maintain the right water level during a cycle. If it stops working or malfunctions, you will need to replace it as soon as possible. To help you out, here is a DIY guide on how to replace the Whirlpool WPW10153532 adjuster.
Tools and Materials Needed:
• Phillips head screwdriver
• New Whirlpool WPW10153532 adjuster
• Pliers
Step 1: Disconnect the Washing Machine from Power Source
Before getting started, make sure that you disconnect your washing machine from the power source. This can be done by unplugging the power cord from the outlet.
Step 2: Remove the Lid and Access the Adjuster
Next, you will need to remove the lid in order to access the adjuster. This can be done by using a Phillips head screwdriver to unscrew the screws from the inside of the lid.
Step 3: Unscrew the Adjuster and Remove it
Once the lid is removed, you can access the adjuster. Use a pair of pliers to unscrew the adjuster and remove it. Make sure to keep the old adjuster as you may need to refer to it when installing the new one.
Step 4: Install the New Adjuster
Now you will need to take the new adjuster and begin to install it. First, make sure that it is lined up properly and then use the pliers to screw it into the correct position. Once it is secure, you can go ahead and reinstall the lid.
Step 5: Test the New Adjuster
Before powering on your machine, it is important to test the new adjuster to make sure that it is working correctly. To do this, fill up the washing machine with water to the desired level and then adjust the settings to lower the water level. This should cause the adjuster to kick in and redirect the flow of water.
Conclusion
Replacing the Whirlpool WPW10153532 adjuster isn’t too difficult if you follow the steps outlined in this guide. As long as you have the necessary tools and materials, anyone can do it! Good luck!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
