WP67006704 Whirlpool Glass Crisper Cover

Whirlpool WP67006704 Glass-Crisper We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
Whirlpool WP67006704 Glass-Crisper We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Write Your Own Review
The following parts are replaced by this product
- 67003852
- 67006704
- 8208324
Replacing the Whirlpool WP67006704 GLASS-CRIB
Tools Needed:
• Phillips head screwdriver
• Flat-head screwdriver
• Putty knife
• Safety glasses
• Work gloves
Instructions:
1. Unplug the refrigerator from the power source and turn off the water supply line if applicable.
2. Remove all food items, shelves, and other existing components from the refrigerator.
3. Carefully use the putty knife to loosen and remove any remaining adhesive that may be stuck on the sides of the old GLASS-CRIB.
4. Take the Phillips head screwdriver and unscrew all screws that were attaching the old GLASS-CRIB to the door frame.
5. Carefully lift the old GLASS-CRIB out of the freezer and set aside.
6. Take your new GLASS-CRIB and insert it into the door frame. Make sure that it fits snugly.
7. Use the screwdriver to secure the screws that attach the new GLASS-CRIB to the door frame.
8. Gently wipe down the new GLASS-CRIB with a damp cloth to get rid of any dust or dirt.
9. Re-install all of the shelves, food items, and other components in the refrigerator.
10. Plug the refrigerator back into the power source and turn on the water supply line if applicable.
11. Test your new GLASS-CRIB to make sure it is working properly.
Congratulations! You have successfully replaced your Whirlpool WP67006704 GLASS-CRIB!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Tools Needed:
• Phillips head screwdriver
• Flat-head screwdriver
• Putty knife
• Safety glasses
• Work gloves
Instructions:
1. Unplug the refrigerator from the power source and turn off the water supply line if applicable.
2. Remove all food items, shelves, and other existing components from the refrigerator.
3. Carefully use the putty knife to loosen and remove any remaining adhesive that may be stuck on the sides of the old GLASS-CRIB.
4. Take the Phillips head screwdriver and unscrew all screws that were attaching the old GLASS-CRIB to the door frame.
5. Carefully lift the old GLASS-CRIB out of the freezer and set aside.
6. Take your new GLASS-CRIB and insert it into the door frame. Make sure that it fits snugly.
7. Use the screwdriver to secure the screws that attach the new GLASS-CRIB to the door frame.
8. Gently wipe down the new GLASS-CRIB with a damp cloth to get rid of any dust or dirt.
9. Re-install all of the shelves, food items, and other components in the refrigerator.
10. Plug the refrigerator back into the power source and turn on the water supply line if applicable.
11. Test your new GLASS-CRIB to make sure it is working properly.
Congratulations! You have successfully replaced your Whirlpool WP67006704 GLASS-CRIB!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.


