W11568640 Whirlpool Knob
Whirlpool W11568640 KNOB We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
Whirlpool W11568640 KNOB We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Write Your Own Review
The following parts are replaced by this product
- W10579764
- W10877186
- W10823538
1. Unplug the refrigerator power cord from the power outlet.
2. Lift the top of the control knob to remove it from the stem on the control panel.
3. Locate the screws that secure the control panel to the refrigerator. Remove the screws, then slide the panel up and off of the refrigerator frame.
4. Unscrew the retaining nut on the underside of the control panel, then pull the shaft of the old knob straight out of the panel.
5. Insert the new Whirlpool W11568640 KNOB into the control panel. Make sure it is fully inserted.
6. Reattach the retaining nut onto the underside of the control panel and hand-tighten it.
7. Slide the control panel back onto the refrigerator frame and reinstall the screws.
8. Replace the top of the control knob onto the shaft. Make sure it fully snaps into place.
9. Plug the refrigerator back into the power outlet.
10. Turn the knob to the desired setting and allow the refrigerator to cool.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
2. Lift the top of the control knob to remove it from the stem on the control panel.
3. Locate the screws that secure the control panel to the refrigerator. Remove the screws, then slide the panel up and off of the refrigerator frame.
4. Unscrew the retaining nut on the underside of the control panel, then pull the shaft of the old knob straight out of the panel.
5. Insert the new Whirlpool W11568640 KNOB into the control panel. Make sure it is fully inserted.
6. Reattach the retaining nut onto the underside of the control panel and hand-tighten it.
7. Slide the control panel back onto the refrigerator frame and reinstall the screws.
8. Replace the top of the control knob onto the shaft. Make sure it fully snaps into place.
9. Plug the refrigerator back into the power outlet.
10. Turn the knob to the desired setting and allow the refrigerator to cool.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
