W11561080 Whirlpool Upper Dishrack Tub Mount Roller
Whirlpool W11561080 WHEEL-TUB i We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Weight : 0.0474 lbs
Dimension : 3.8976 x 1.5354 x 1.1023
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
Whirlpool W11561080 WHEEL-TUB i We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Weight : 0.0474 lbs
Dimension : 3.8976 x 1.5354 x 1.1023
Write Your Own Review
The following parts are replaced by this product
- W11086088
Step 1: Unplug the washing machine from the electrical outlet. Move the washing machine away from the wall, and slide a piece of cardboard or linoleum underneath the machine for protection.
Step 2: Remove the screw from the back of the washer that holds the control panel in place. You may need to use a Phillips or flat head screwdriver.
Step 3: Pull off the front panel and pry off the clips that secure it to the washer. Then, remove the screws that hold the top panel in place.
Step 4: Unscrew the two screws that secure the tub support to the tub. Then, remove the two screws that hold the tub to the base of the washer.
Step 5: Lift the washing machine tub off its base and remove the old wheel.
Step 6: Place the new Whirlpool W11561080 WHEEL-TUB on the washer base and secure it with the two screws. Then, reattach the tub support to the bottom of the tub.
Step 7: Reattach the top panel to the washer, and then put the front panel back on. Secure it with the clips and screws.
Step 8: Put the washer back in place and plug it into an electrical outlet.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Step 2: Remove the screw from the back of the washer that holds the control panel in place. You may need to use a Phillips or flat head screwdriver.
Step 3: Pull off the front panel and pry off the clips that secure it to the washer. Then, remove the screws that hold the top panel in place.
Step 4: Unscrew the two screws that secure the tub support to the tub. Then, remove the two screws that hold the tub to the base of the washer.
Step 5: Lift the washing machine tub off its base and remove the old wheel.
Step 6: Place the new Whirlpool W11561080 WHEEL-TUB on the washer base and secure it with the two screws. Then, reattach the tub support to the bottom of the tub.
Step 7: Reattach the top panel to the washer, and then put the front panel back on. Secure it with the clips and screws.
Step 8: Put the washer back in place and plug it into an electrical outlet.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
