W11449482 Whirlpool Control Board

DIY Guide: How to Replace the Whirlpool W11449482 CNTRL-ELEC

1. Gather all the necessary tools and supplies. To replace the Whirlpool W11449482 CNTRL-ELEC, you will need a screwdriver, a plastic tool (or putty knife), and a new control panel.

2. Locate the front panel of the Whirlpool W11449482 CNTRL-ELEC. Use the plastic tool or putty knife to carefully pry off the front cover panel from the appliance frame.

3. Disconnect the wiring harness from the back of the control panel. Using the screwdriver, remove the screws that are holding the panel in place.

4. Carefully unplug the wiring from the top of the control panel. Once the old panel is removed, you can now install the new one in its place.

5. Insert the new control panel into the slot and secure it with the screws that were removed in the previous step.

6. Reconnect the wiring between the control panel and the appliance frame, making sure the connectors are firmly in place.

7. Install the front panel back onto the appliance frame and make sure it’s securely in place.

8. Turn on the power supply to the appliance and check the operation of the newly installed control panel. If everything is working as intended, you’re done!

Congratulations! You have successfully replaced the Whirlpool W11449482 CNTRL-ELEC. Make sure you double check all your work before powering up the appliance to ensure a safe and successful installation.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.