W11416362 Whirlpool Sump
Whirlpool W11416362 PUMP&MOTOR KIT We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Whirlpool W11416362 PUMP&MOTOR KIT We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Write Your Own Review
Step 1: Disconnect Power
Locate your Whirlpool W11416362 pump and motor and shut off its power source before undertaking any repairs to the unit. Unplug the power cord from the wall outlet or turn off the breaker in the main fuse box that powers the unit.
Step 2: Remove Water Supply Line
Locate the water supply line connected to the unit and detach it by unscrewing the connection. Drain the remaining water into a bucket or basin before proceeding with the repair.
Step 3: Remove the Motor and Pump Assembly
Locate the screws securing the motor and pump assembly and remove them. Be sure to keep track of each screw and its original location for easy reassembly. Once all of the screws have been removed, carefully lift the motor and pump assembly from the unit and set it aside.
Step 4: Install New Motor and Pump Assembly
Place the new motor and pump assembly into the unit and secure it with the screws. Make sure all connections are tight and there are no gaps in the seal to prevent any possible leaks.
Step 5: Reattach Water Supply Line
Reattach the water supply line to the unit, ensuring a tight seal. Turn on the water supply to the unit, checking for any leaks at the connection before proceeding.
Step 6: Restore Power
Once all connections have been checked and confirmed to be secure, plug the power cord back into the wall outlet or turn the breaker back to the “on” position. Turn on the unit and allow time for the water to flow through the system before using your newly replaced Whirlpool W11416362 pump and motor.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Locate your Whirlpool W11416362 pump and motor and shut off its power source before undertaking any repairs to the unit. Unplug the power cord from the wall outlet or turn off the breaker in the main fuse box that powers the unit.
Step 2: Remove Water Supply Line
Locate the water supply line connected to the unit and detach it by unscrewing the connection. Drain the remaining water into a bucket or basin before proceeding with the repair.
Step 3: Remove the Motor and Pump Assembly
Locate the screws securing the motor and pump assembly and remove them. Be sure to keep track of each screw and its original location for easy reassembly. Once all of the screws have been removed, carefully lift the motor and pump assembly from the unit and set it aside.
Step 4: Install New Motor and Pump Assembly
Place the new motor and pump assembly into the unit and secure it with the screws. Make sure all connections are tight and there are no gaps in the seal to prevent any possible leaks.
Step 5: Reattach Water Supply Line
Reattach the water supply line to the unit, ensuring a tight seal. Turn on the water supply to the unit, checking for any leaks at the connection before proceeding.
Step 6: Restore Power
Once all connections have been checked and confirmed to be secure, plug the power cord back into the wall outlet or turn the breaker back to the “on” position. Turn on the unit and allow time for the water to flow through the system before using your newly replaced Whirlpool W11416362 pump and motor.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
