W11412291 Whirlpool Drain Pump
Whirlpool W11412291 PUMP-DRAIN We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Weight : 0.767200 lbs
Dimension : 5.748000 x 4.133800 x 4.488100
Whirlpool W11412291 PUMP-DRAIN We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Weight : 0.767200 lbs
Dimension : 5.748000 x 4.133800 x 4.488100
Write Your Own Review
Replacing the Whirlpool W11412291 PUMP-DRAIN
DIY Instructions
1. First, unplug the appliance from power source before beginning the repair.
2. Next, tilt the appliance forward and locate the pump drain at the bottom of the appliance.
3. Once you have located the pump drain, unscrew the two housing screws with a Phillips screwdriver.
4. Gently lift the housing cover off the drain pump and set aside.
5. Now, unscrew the four mounting screws holding the drain pump in place using a Phillips screwdriver.
6. Lift the old drain pump out of the appliance and set aside.
7. Place new pump-drain into the appliance, ensuring the outlet nozzle is facing downward.
8. Now, secure the new pump-drain by screwing the four mounting screws back into place.
9. Reconnect the two-wire connector to the motor.
10. Finally, replace the housing cover and secure it with the two screws.
Congratulations! You have successfully replaced the Whirlpool W11412291 PUMP-DRAIN.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
DIY Instructions
1. First, unplug the appliance from power source before beginning the repair.
2. Next, tilt the appliance forward and locate the pump drain at the bottom of the appliance.
3. Once you have located the pump drain, unscrew the two housing screws with a Phillips screwdriver.
4. Gently lift the housing cover off the drain pump and set aside.
5. Now, unscrew the four mounting screws holding the drain pump in place using a Phillips screwdriver.
6. Lift the old drain pump out of the appliance and set aside.
7. Place new pump-drain into the appliance, ensuring the outlet nozzle is facing downward.
8. Now, secure the new pump-drain by screwing the four mounting screws back into place.
9. Reconnect the two-wire connector to the motor.
10. Finally, replace the housing cover and secure it with the two screws.
Congratulations! You have successfully replaced the Whirlpool W11412291 PUMP-DRAIN.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
