W11403873 Whirlpool Shock Dampening Device

Step 1: Shut off the power to the dishwasher. Unplug the appliance or turn off the breaker to ensure no electricity is running through the machine.

Step 2: Remove the bottom panel of the dishwasher by unscrewing the screws that are holding it in place. Carefully lift off the panel and set it aside.

Step 3: Locate the Whirlpool W11403873 Strap beneath the dishwasher tub. This can be located at the front of the machine.

Step 4: Disconnect the strap from the two clips that attach it to the dishwasher.

Step 5: Replace the old strap with a new one. Make sure to securely connect it to the clips.

Step 6: Put the bottom panel back in place and secure it with the screws.

Step 7: Turn the power back on and test the dishwasher.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.