W11389703 Whirlpool Bracket

DIY Replacement of the Whirlpool W11389703 Bracket

1. Unplug your appliance and turn off its power source.
Removing the existing bracket is the first step to replacing the Whirlpool W11389703 bracket. Make sure that all power sources to the appliance are turned off, and that it is unplugged before attempting this procedure.

2. Remove the existing bracket from the appliance.
Using a screwdriver, remove the screws that secure the existing bracket to the appliance. Gently pull the bracket away from the appliance, taking care not to damage any of the wires.

3. Install the new Whirlpool W11389703 bracket.
Secure the new bracket in place with the screws you removed during step two. Make sure that all wires are connected properly, and that the bracket is securely in place before moving on to the next step.

4. Reconnect the power and plug in the appliance.
Once you have ensured that the bracket is in place, reconnect the appliance's power source and plug it in. Then, turn the power back on and test your appliance to make sure that the new bracket is functioning properly.

By following these simple steps, you can easily replace the Whirlpool W11389703 bracket without professional help or expensive repair costs.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.