W11354870 Whirpool Door Assembly Kit
This Door Assembly Kit replaces the outermost part of your oven’s door and includes the heat-resistant glass and a handle. The glass allows you to view food items as they cook inside. This part is specifically designed to be used with stainless steel appliances. Replacing this part will require basic hand tools, some disassembly of the oven and novice repair experience. You must unplug the oven or shut off the house circuit breaker for the oven before installing this part. Recommended Item: KitchenAid Nameplate (item W10909682). Caution: Handle the door panel with care to avoid breakage.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Door Assembly Kit
• Tools Needed: Multi screwdriver
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Door Assembly Kit
• Tools Needed: Multi screwdriver
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
This Door Assembly Kit replaces the outermost part of your oven’s door and includes the heat-resistant glass and a handle. The glass allows you to view food items as they cook inside. This part is specifically designed to be used with stainless steel appliances. Replacing this part will require basic hand tools, some disassembly of the oven and novice repair experience. You must unplug the oven or shut off the house circuit breaker for the oven before installing this part. Recommended Item: KitchenAid Nameplate (item W10909682). Caution: Handle the door panel with care to avoid breakage.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Door Assembly Kit
• Tools Needed: Multi screwdriver
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Door Assembly Kit
• Tools Needed: Multi screwdriver
Write Your Own Review
The following parts are replaced by this product
- W10771242
Replacing the W11354870 Whirlpool Range Glass-Door
Are you looking to replace the glass door on your W11354870 Whirlpool Range? If so, you can do it yourself with just a few tools and a bit of patience. To help you get started, here is a simple DIY guide for replacing the W11354870 Whirlpool Range Glass-Door.
1. Gather the necessary tools. You will need a screwdriver, a putty knife, a rag, a flathead screwdriver, and a pair of needle nose pliers.
2. Unplug the range from the wall outlet.
3. Remove the screws from the hinges of the door. Use the screwdriver to loosen the screws and then use the flathead screwdriver to pry them off.
4. Carefully remove the door from the range and lay it on a flat surface. Place the rag on top of the door to protect it from scratches.
5. Use the putty knife to remove any remaining sealant from the edges of the door.
6. Use the needle nose pliers to disconnect the electrical wiring connected to the heating element, before removing the old door.
7. Insert the new door into the range and secure it with the appropriate screws.
8. Reconnect the electrical wiring and make sure it is secure.
9. Reapply any removed sealant onto the edges of the door with the putty knife.
10. Test the new door to make sure it is properly aligned and opens and closes correctly.
11. Plug the range back in and you’re done!
Congratulations! By following these simple steps, you have successfully replaced the W11354870 Whirlpool Range Glass-Door.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Are you looking to replace the glass door on your W11354870 Whirlpool Range? If so, you can do it yourself with just a few tools and a bit of patience. To help you get started, here is a simple DIY guide for replacing the W11354870 Whirlpool Range Glass-Door.
1. Gather the necessary tools. You will need a screwdriver, a putty knife, a rag, a flathead screwdriver, and a pair of needle nose pliers.
2. Unplug the range from the wall outlet.
3. Remove the screws from the hinges of the door. Use the screwdriver to loosen the screws and then use the flathead screwdriver to pry them off.
4. Carefully remove the door from the range and lay it on a flat surface. Place the rag on top of the door to protect it from scratches.
5. Use the putty knife to remove any remaining sealant from the edges of the door.
6. Use the needle nose pliers to disconnect the electrical wiring connected to the heating element, before removing the old door.
7. Insert the new door into the range and secure it with the appropriate screws.
8. Reconnect the electrical wiring and make sure it is secure.
9. Reapply any removed sealant onto the edges of the door with the putty knife.
10. Test the new door to make sure it is properly aligned and opens and closes correctly.
11. Plug the range back in and you’re done!
Congratulations! By following these simple steps, you have successfully replaced the W11354870 Whirlpool Range Glass-Door.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
