W11210459 Whirlpool Washer Water Inlet Valve
This Top Load Washer Water Inlet Valve is located at the rear of the appliance and allows hot and cold water to fill in the washer during the cleaning cycle. If your washer isn’t getting any cold or hot water, your washer is filling slowly, not filling at all or leaking cold or hot water onto the floor, replacing this part may alleviate these issues. Replacing this part will require basic hand tools, some disassembly of the washer and novice repair experience. You must unplug the washing machine or shut off the house circuit breaker for the appliance before installing this part. Also make sure you turn off the hot and cold water supplies. Helpful Tip: We also recommend using affresh® Washing Machine Cleaner Tablets* (item W10501250) once a month to help reduce odor-causing residue that can build up in your washing machine's drain without proper care. *affresh® brand products are owned and distributed by Whirlpool Corporation.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Top Load Washer Water Inlet Valve
• Tools Needed: Multi screwdriver, putty knife
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Top Load Washer Water Inlet Valve
• Tools Needed: Multi screwdriver, putty knife
Weight : 1.7266 lbs
Dimension : 10.25 x 7.5 x 3.25
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
This Top Load Washer Water Inlet Valve is located at the rear of the appliance and allows hot and cold water to fill in the washer during the cleaning cycle. If your washer isn’t getting any cold or hot water, your washer is filling slowly, not filling at all or leaking cold or hot water onto the floor, replacing this part may alleviate these issues. Replacing this part will require basic hand tools, some disassembly of the washer and novice repair experience. You must unplug the washing machine or shut off the house circuit breaker for the appliance before installing this part. Also make sure you turn off the hot and cold water supplies. Helpful Tip: We also recommend using affresh® Washing Machine Cleaner Tablets* (item W10501250) once a month to help reduce odor-causing residue that can build up in your washing machine's drain without proper care. *affresh® brand products are owned and distributed by Whirlpool Corporation.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Top Load Washer Water Inlet Valve
• Tools Needed: Multi screwdriver, putty knife
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Top Load Washer Water Inlet Valve
• Tools Needed: Multi screwdriver, putty knife
Weight : 1.7266 lbs
Dimension : 10.25 x 7.5 x 3.25
Write Your Own Review
The following parts are replaced by this product
- W10701459
- W10838319
- W11038711
DIY Replacing the Whirlpool W11210459 Valve-Solenoid
Replacing your Whirlpool W11210459 valve-solenoid is easy and can be done with a few simple steps. This guide will help you replace the valve-solenoid quickly, safely and save you money.
Step 1: Identify the location of the valve-solenoid. It is usually located near the back of the refrigerator, typically mounted to the side or underneath the appliance.
Step 2: Disconnect the power to the refrigerator before attempting to access the valve-solenoid.
Step 3: Remove the old valve-solenoid. This involves unscrewing it from the mount, and then carefully pulling it out.
Step 4: Replace the old valve-solenoid with a new one that is compatible with your refrigerator model.
Step 5: Reattach the new valve-solenoid to the mount and double-check that it is in position.
Step 6: Reconnect the power to the refrigerator.
You have now successfully replaced the Whirlpool W11210459 valve-solenoid!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Replacing your Whirlpool W11210459 valve-solenoid is easy and can be done with a few simple steps. This guide will help you replace the valve-solenoid quickly, safely and save you money.
Step 1: Identify the location of the valve-solenoid. It is usually located near the back of the refrigerator, typically mounted to the side or underneath the appliance.
Step 2: Disconnect the power to the refrigerator before attempting to access the valve-solenoid.
Step 3: Remove the old valve-solenoid. This involves unscrewing it from the mount, and then carefully pulling it out.
Step 4: Replace the old valve-solenoid with a new one that is compatible with your refrigerator model.
Step 5: Reattach the new valve-solenoid to the mount and double-check that it is in position.
Step 6: Reconnect the power to the refrigerator.
You have now successfully replaced the Whirlpool W11210459 valve-solenoid!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
