W11174397 Whirlpool Washer Dispenser Handle
Dispenser handle works with some Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models of washing machines.
Weight : 1.070600 lbs
Dimension : 9.212500 x 7.598400 x 2.125900
Dispenser handle works with some Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models of washing machines.
Weight : 1.070600 lbs
Dimension : 9.212500 x 7.598400 x 2.125900
Write Your Own Review
DIY Step-by-Step Instructions on Replacing the Whirlpool Washer Dispenser Handle W11174397
If the handle of your Whirlpool washing machine's dispenser has broken or is not working properly, it can be replaced easily with the help of a few simple tools. Follow these steps to quickly and safely replace the Whirlpool washer dispenser handle W11174397.
1. Unplug your washing machine from the wall outlet.
2. Turn off the water supply by turning the valves to the left.
3. Carefully tilt the washing machine towards you to gain better access to the back panel of the machine.
4. Use an appropriate screwdriver to remove the screws that are holding the panel in place and carefully remove it.
5. Locate the washer's dispenser handle, which is connected to a plastic lever arm.
6. Disconnect the plastic lever arm by removing the screw and set aside.
7. Insert a flat-head screwdriver between the dispenser housing and the handle and carefully pry them apart.
8. Remove the broken handle by pulling it away from the machine.
9. Insert the new handle into place and make sure it fits snugly.
10. Reattach the plastic lever arm to the new handle, using the screw and tighten securely.
11. Replace the back panel and secure it with the screws.
12. Turn on the water supply valves, plug in the power cord, and check that the washer works properly.
Congratulations! You have successfully replaced the Whirlpool Washer Dispenser Handle W11174397.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
If the handle of your Whirlpool washing machine's dispenser has broken or is not working properly, it can be replaced easily with the help of a few simple tools. Follow these steps to quickly and safely replace the Whirlpool washer dispenser handle W11174397.
1. Unplug your washing machine from the wall outlet.
2. Turn off the water supply by turning the valves to the left.
3. Carefully tilt the washing machine towards you to gain better access to the back panel of the machine.
4. Use an appropriate screwdriver to remove the screws that are holding the panel in place and carefully remove it.
5. Locate the washer's dispenser handle, which is connected to a plastic lever arm.
6. Disconnect the plastic lever arm by removing the screw and set aside.
7. Insert a flat-head screwdriver between the dispenser housing and the handle and carefully pry them apart.
8. Remove the broken handle by pulling it away from the machine.
9. Insert the new handle into place and make sure it fits snugly.
10. Reattach the plastic lever arm to the new handle, using the screw and tighten securely.
11. Replace the back panel and secure it with the screws.
12. Turn on the water supply valves, plug in the power cord, and check that the washer works properly.
Congratulations! You have successfully replaced the Whirlpool Washer Dispenser Handle W11174397.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
