W11105133 Whirlpool Burner Grate

Replacing the Whirlpool W11105133 GRATE-BRNR

1. Unplug the refrigerator and turn off the water supply before beginning any repairs.

2. Remove the grates from the top of the burner by using a Phillips-head screwdriver to remove the screws that hold them in place.

3. Use a flat-head screwdriver to carefully lift the retaining clips located on the underside of the grill. Carefully lift the entire grill out of the refrigerator.

4. Check the condition of the flame spreader and any other components beneath it. If necessary, clean or replace these parts.

5. Place the new grate-brnr into the refrigerator and secure using the retaining clips and screws.

6. Turn on the water supply, then plug the refrigerator back in.

7. Test the new grate-brnr by turning it on and off a few times. Make sure all connections are tight and that everything is working correctly.

8. Once you have tested the new grate-brnr and are sure that it is working properly, you can begin using your refrigerator again.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.