IM117000 Frigidaire Ice Maker Kit
The IM117000 Frigidaire Ice Maker Kit includes the ice mold and the control device. The ice maker receives water from the water inlet valve and then holds the water in the ice mold until the water freezes solid. It then automatically ejects the ice and refills to continue the process until the ice storage bin is full.
Weight : 6.684300 lbs
Dimension : 16.377900 x 7.874000 x 7.204700
The IM117000 Frigidaire Ice Maker Kit includes the ice mold and the control device. The ice maker receives water from the water inlet valve and then holds the water in the ice mold until the water freezes solid. It then automatically ejects the ice and refills to continue the process until the ice storage bin is full.
Weight : 6.684300 lbs
Dimension : 16.377900 x 7.874000 x 7.204700
Write Your Own Review
DIY Step-by-Step Guide to Replacing a Frigidaire IM117000 Icemaker Kit
1. Prepare the tools and materials you'll need. Gather a Phillips screwdriver, adjustable wrench, nut driver, and an IM117000 icemaker kit.
2. Unplug the refrigerator from the wall outlet or shut off power at the circuit breaker.
3. Locate the area behind the refrigerator where the icemaker is located.
4. Use the adjustable wrench to remove the mounting screws that secure the ice maker.
5. Disconnect the electrical plug from the existing icemaker.
6. Pull out the old icemaker and discard it.
7. Install the new icemaker kit by first connecting the electrical plug and then securing it with the mounting screws.
8. Replace any insulation that was removed when taking out the old icemaker.
9. Ensure all wiring is safe and secure.
10. Reinstall the kick plate access panel.
11. Plug the refrigerator back into the outlet or turn on the power at the circuit breaker.
12. Place a container beneath the icemaker and make sure the water supply line is securely connected to the icemaker solenoid valve.
13. Turn the icemaker shut-off switch to the "on" position.
14. Wait for at least 24 hours for the icemaker to build up its supply of ice.
You have successfully replaced the Frigidaire IM117000 Icemaker Kit.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
1. Prepare the tools and materials you'll need. Gather a Phillips screwdriver, adjustable wrench, nut driver, and an IM117000 icemaker kit.
2. Unplug the refrigerator from the wall outlet or shut off power at the circuit breaker.
3. Locate the area behind the refrigerator where the icemaker is located.
4. Use the adjustable wrench to remove the mounting screws that secure the ice maker.
5. Disconnect the electrical plug from the existing icemaker.
6. Pull out the old icemaker and discard it.
7. Install the new icemaker kit by first connecting the electrical plug and then securing it with the mounting screws.
8. Replace any insulation that was removed when taking out the old icemaker.
9. Ensure all wiring is safe and secure.
10. Reinstall the kick plate access panel.
11. Plug the refrigerator back into the outlet or turn on the power at the circuit breaker.
12. Place a container beneath the icemaker and make sure the water supply line is securely connected to the icemaker solenoid valve.
13. Turn the icemaker shut-off switch to the "on" position.
14. Wait for at least 24 hours for the icemaker to build up its supply of ice.
You have successfully replaced the Frigidaire IM117000 Icemaker Kit.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
