5304528029 Frigidaire Valve Assembly Vortex with Flow Meter
5304528029 Frigidaire Valve Assembly Vortex with Flow Meter
Weight : 2.592900 lbs
Dimension : 11.377900 x 4.212500 x 7.519600
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
5304528029 Frigidaire Valve Assembly Vortex with Flow Meter
Weight : 2.592900 lbs
Dimension : 11.377900 x 4.212500 x 7.519600
Write Your Own Review
The following parts are replaced by this product
- 5304514790
- 5304522534
1. Before starting, gather the tools and supplies that you need to replace the Frigidaire 5304528029 VALVE,ASMY,VORTEX,W/FLOW MET. You will need two adjustable wrenches, pliers, and a new valve.
2. Make sure to turn off the water supply to the valve before beginning.
3. Use one of the wrenches to loosen and remove the nuts that hold the old valve in place. Carefully remove the valve and set aside.
4. Install the new valve in the same location as the old one. Secure it with the nuts you removed earlier.
5. Connect the connection pipes from the outlet side of the new valve to the water inlet pipe. Again, use one of the wrenches to secure the nut.
6. Turn on the water supply to the valve and check for leaks. Make adjustments to the nuts if necessary to stop any leaks.
7. Once the installation is complete, test the valve to make sure it’s working properly.
Following these steps should help you safely and successfully replace the Frigidaire 5304528029 VALVE,ASMY,VORTEX,W/FLOW MET. If you encounter any difficulty or are unsure about any step of the installation process, please consult a professional for help.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
2. Make sure to turn off the water supply to the valve before beginning.
3. Use one of the wrenches to loosen and remove the nuts that hold the old valve in place. Carefully remove the valve and set aside.
4. Install the new valve in the same location as the old one. Secure it with the nuts you removed earlier.
5. Connect the connection pipes from the outlet side of the new valve to the water inlet pipe. Again, use one of the wrenches to secure the nut.
6. Turn on the water supply to the valve and check for leaks. Make adjustments to the nuts if necessary to stop any leaks.
7. Once the installation is complete, test the valve to make sure it’s working properly.
Following these steps should help you safely and successfully replace the Frigidaire 5304528029 VALVE,ASMY,VORTEX,W/FLOW MET. If you encounter any difficulty or are unsure about any step of the installation process, please consult a professional for help.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
