5304521015 Frigidaire Oven Surface Burner Base
The Frigidaire 5304521015 BURNER BASE is an essential component of your range. We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Weight : 0.0902 lbs
Dimension : 3.5039 x 3.0314 x 1.1811
The Frigidaire 5304521015 BURNER BASE is an essential component of your range. We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Weight : 0.0902 lbs
Dimension : 3.5039 x 3.0314 x 1.1811
Write Your Own Review
1. Start by unplugging the Frigidaire range to ensure you don’t interfere with any electric components.
2. Remove the screws from the burner’s cover plate and remove the cover plate, so that you can access the burner itself.
3. Unscrew the nuts which hold the burner in place and remove it from the Frigidaire range.
4. Cut off the wires connecting the old burner to the wiring harness, then disconnect the wiring harness.
5. Replace the old burner with the new Frigidaire 5304521015 burner, securing it with the nuts you removed earlier.
6. Connect the wires to the wiring harness, using wire connectors, and attach the wiring harness to the burner.
7. Place the burner’s cover plate back into position and tighten the screws you removed earlier.
8. Plug the Frigidaire range back into the wall outlet and test the new burner to make sure everything is working correctly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
2. Remove the screws from the burner’s cover plate and remove the cover plate, so that you can access the burner itself.
3. Unscrew the nuts which hold the burner in place and remove it from the Frigidaire range.
4. Cut off the wires connecting the old burner to the wiring harness, then disconnect the wiring harness.
5. Replace the old burner with the new Frigidaire 5304521015 burner, securing it with the nuts you removed earlier.
6. Connect the wires to the wiring harness, using wire connectors, and attach the wiring harness to the burner.
7. Place the burner’s cover plate back into position and tighten the screws you removed earlier.
8. Plug the Frigidaire range back into the wall outlet and test the new burner to make sure everything is working correctly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
