5304518870 Frigidaire Oven Air Diverter
Part #: WCI 5304518870
The Frigidaire 5304518870 DIVIDER is the perfect solution for your oven. We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
The Frigidaire 5304518870 DIVIDER is the perfect solution for your oven. We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Write Your Own Review
How to Replace the Frigidaire 5304518880 DIVIDER
If your Frigidaire refrigerator is in need of a new divider, you can easily replace it yourself with just a few tools. This DIY guide will show you how to safely and properly remove and install the new Frigidaire 5304518880 DIVIDER.
Safety Warning: Before starting any repairs on your refrigerator, make sure to completely unplug the unit from any electrical source!
Tools Needed:
- Phillips head screwdriver
- Flathead screwdriver
- New Frigidaire 5304518880 DIVIDER
Instructions:
1. Start by removing the inner door panel on the freezer side of your refrigerator. Using a Phillips head screwdriver, unscrew the screws holding the panel in place; then, gently pull the panel away from the freezer door.
2. Once the panel is removed, you should be able to locate the divider that needs to be replaced. Using a flathead screwdriver, loosen the screws that secure it in place.
3. Carefully remove the old Frigidaire 5304518800 DIVIDER and set it aside.
4. Take the new Frigidaire 5304518800 Divider and line up the screw holes with the ones on the freezer door. Secure it in place with the screws that were removed earlier.
5. Put the inner door panel back in place and Screw it into the freezer door using the Phillips head screwdriver.
6. Finally, plug in the refrigerator and your repair is complete!
Congratulations! You have completed the replacement of your Frigidaire 5304518800 DIVIDER!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
If your Frigidaire refrigerator is in need of a new divider, you can easily replace it yourself with just a few tools. This DIY guide will show you how to safely and properly remove and install the new Frigidaire 5304518880 DIVIDER.
Safety Warning: Before starting any repairs on your refrigerator, make sure to completely unplug the unit from any electrical source!
Tools Needed:
- Phillips head screwdriver
- Flathead screwdriver
- New Frigidaire 5304518880 DIVIDER
Instructions:
1. Start by removing the inner door panel on the freezer side of your refrigerator. Using a Phillips head screwdriver, unscrew the screws holding the panel in place; then, gently pull the panel away from the freezer door.
2. Once the panel is removed, you should be able to locate the divider that needs to be replaced. Using a flathead screwdriver, loosen the screws that secure it in place.
3. Carefully remove the old Frigidaire 5304518800 DIVIDER and set it aside.
4. Take the new Frigidaire 5304518800 Divider and line up the screw holes with the ones on the freezer door. Secure it in place with the screws that were removed earlier.
5. Put the inner door panel back in place and Screw it into the freezer door using the Phillips head screwdriver.
6. Finally, plug in the refrigerator and your repair is complete!
Congratulations! You have completed the replacement of your Frigidaire 5304518800 DIVIDER!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.