Washer Parts Spring

This Top Load Washer Suspension Spring Kit is a set of 6 springs that support the washer’s outer tub and keep it stable during the cleaning cycle, including when loads are u ...nbalanced. Each spring measures approximately 7-1/2" L. You'll release the tabs from the top of the washer and remove the front panel from the machine to access the old springs. You can remove all of the springs from the front of the washer, but, you can also remove the back panel of the appliance for easier access. Apply a small amount of grease to the bottom of the new springs before you reconnect them to the washer tub. Replacing this part will require basic hand tools, some disassembly of the washing machine and novice repair experience. You must unplug the washer or shut off the house circuit breaker for the appliance before installing this part. Also make sure you turn off the hot and cold water supplies. Helpful Tip: We also recommend using affresh® Washing Machine Cleaner* (item W10501250) once a month to help reduce odor-causing residue that can build up in your washing machine's drain without proper care. *affresh® brand products are owned and distributed by Whirlpool Corporation.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Top Load Washer Suspension Spring Kit• Tools Needed: Multi screwdriver, putty knife, standard locking pliers and lubricating grease Read More Read Less

The Top Load Washer Suspension Spring keeps the weight of the wash tub balanced. If the end of the spring rusts and your tub sits off balance, this part may need to be replace ...d. To access this part, you'll first need to remove the front panel of the washer. Usually held in place by two screws, some washer models have trim covers that need to be removed before gaining access to the screws. Before installing the spring, add a dab of grease to lubricate it. Replacing this part will require basic hand tools, some disassembly of the combination washer and novice repair experience. You must unplug the appliance or shut off the house circuit breaker before installing this part. Also make sure you turn off your hot and cold water supplies. Helpful Tip: We also recommend using affresh® Washing Machine Cleaner* (item W10501250) once a month to help reduce odor-causing residue that can build up in your washing machine's drain without proper care. *affresh® brand products are owned and distributed by Whirlpool Corporation.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Top Load Washer Suspension Spring• Tools Needed: Multi screwdriver, putty knife, pliers Read More Read Less

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.