Washer Parts

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

This Dryer Blower Wheel pulls air over the heat source, through the clothes drum, and past the thermostats, then pushes it out the exhaust duct. If your dryer is making noise ...during use or not drying your clothes as expected, replacing this part may alleviate these issues. This part is housed on the bottom, inside of the appliance and attaches to the drive motor shaft. Replacing this part will require basic hand tools, some disassembly of the appliance and novice repair experience. You must unplug the appliance or shut off the house circuit breaker before installing this part.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Dryer Blower Wheel• Tools Needed: Multi screwdriver Read More Read Less

Maintain the performance of your washing machine with this top-quality bearing, designed specifically for GE and its compatible brands, including Hotpoint, Haier, Monogram, an ...d Café. Crafted for durability, this part ensures smooth operation and longevity, minimizing wear and tear on your appliance. It’s an essential component for maintaining optimal washing efficiency and reducing noise levels during cycles. Whether you're replacing an old or worn-out part or performing routine maintenance, this bearing is a reliable choice for DIY repairs. Ensure your washer runs like new with this expertly engineered component, and enjoy the confidence of a well-made product designed to meet high standards of performance and reliability. Maintain your laundry experience effortlessly! Read More Read Less

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

This Direct Drive Washer Drain Pump removes water from the appliance during the drain portion of the cleaning cycle. This model is for beltless direct-drive washers and has 2 ...large ports with a backflow flapper valve. If the washer will fill and drain the water from the tub, but doesn't agitate or spin properly, replacing this part may alleviate these issues. To replace the part, remove the washer console and disconnect the lid switch to access the old part. Remove the body from the frame of the washer by tilting at a 45-degree angle and lifting it off. Place towels down to catch any water from the hoses when removed. The new pump should slide on easily –don't force it on. If you feel resistance when sliding the pump onto the shaft, you may need to remove any shaft residue left from the previous pump. Replacing this part will require basic hand tools, some disassembly of the appliance and novice repair experience. You must unplug the appliance or shut off the house circuit breaker before installing this part. Also make sure you turn off the hot and cold water supplies. Recommended Item: Also consider replacing the washer drive motor coupler (item 285753A) at the same time you complete this repair. Helpful Tip: We also recommend using affresh® Washing Machine Cleaner Tablets* (item W10135699) once a month to help reduce odor-causing residue that can build up in your washing machine's drain without proper care. *affresh® brand products are owned and distributed by Whirlpool Corporation.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Direct Drive Washer Drain Pump• Tools Needed: Multi screwdriver, putty knife Read More Read Less

Ensure your washing machine operates smoothly with this durable replacement belt designed for compatibility with top brands such as GE, Hotpoint, Haier, Monogram, and Café. C ...rafted by GE, this essential component plays a vital role in maintaining the functionality of your washer, ensuring effective operation during each cycle. Replacing a worn or damaged belt can alleviate problems such as excessive noise or inefficient washing performance. Made with high-quality materials, this part guarantees reliability and longevity, providing peace of mind with every load. Easy to install, it’s the perfect solution for DIY repairs. Keep your laundry routine on track by investing in this crucial washer part. Read More Read Less

The Dryer Drum Belt circles the dryer’s drum and attaches it to the motor to create constant motion during the drying cycle. If your dryer’s motor is running but the drum ...isn't turning, replacing this part may alleviate the issue. To access the part, first lift up the lint screen cover and remove the two screws. If you have the type of lint screen that has the cover built in, just pull it out and then remove the screws. Next, take a putty knife around the edge of the top of your dryer and find the release clips--press these in to release the top of the dryer so you can swing it open. The front panel also needs to be removed to replace the belt. Replacing this part will require basic hand tools, some disassembly of the appliance and novice repair experience. You must unplug the appliance or shut off the house circuit breaker before installing this part.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Dryer Drum Belt• Tools Needed: Multi screwdriver, putty knife Read More Read Less

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

The Top Load Washer Lid Switch Assembly detects if the lid of the washer is open or closed and prevents the appliance from spinning or agitating if the lid isn’t secured. If ... your washer won’t initiate the cleaning cycle, replacing this part may alleviate the issue. This assembly includes (1) lid switch with actuator and wire harness, (2) zip ties and installation instructions. The appliance’s repair manual (item 4313896) will be helpful to complete this repair. Replacing this part will require basic hand tools, some disassembly of the appliance and novice repair experience. You must unplug the appliance or shut off the house circuit breaker before installing this part. Also make sure you turn off the hot and cold water supplies. We also recommend using affresh® Washing Machine Cleaner Tablets* (item W10135699) once a month to help reduce odor-causing residue that can build up in your washing machine's drain without proper care. *affresh® brand products are owned and distributed by Whirlpool Corporation.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Top Load Washer Lid Switch Assembly• Tools Needed: Multi screwdriver Read More Read Less

The Top Load Washer Agitator Dogs facilitate agitation during the cleaning cycle. If the top part of the agitator in your appliance is not moving properly but the bottom still ... functions correctly, replacing this part may alleviate the issue. This repair kit includes (4) agitator dogs. Replacing this part will require basic hand tools, some disassembly of the appliance and novice repair experience. You must unplug the appliance or shut off the house circuit breaker before installing this part. Also make sure you turn off the hot and cold water supplies. We also recommend using affresh® Washing Machine Cleaner Tablets* (item W10135699) once a month to help reduce odor-causing residue that can build up in your washing machine's drain without proper care. *affresh® brand products are owned and distributed by Whirlpool Corporation.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (4) Top Load Washer Agitator Dogs• Tools Needed: Flat blade screwdriver and socket with long extension Read More Read Less