PA Categories

This Front Load Washer Drum Baffle Kit includes 3 baffles and 3 screws. The baffles are installed on the inside of the washer drum, and tumble the clothes in the washer. If th ...e baffles are loose or damaged, they may need to be replaced. To access the part, remove the top panel of the washer. If your specific model has screws, be sure to remove them with a magnetic tip screwdriver so they don't get lost inside the machine. Replacing this part may require specialized tools, complicated disassembly of the appliance, and repair experience. Please remember to unplug the washer or shut off the house circuit breaker for the appliance before installing this part. Also be sure to shut off your hot and cold water supplies.Recommended parts: Screw (item #697027 ) and Single Drum baffle (item #1059587) from parts.com.Part Specification•  This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications•  This product is a replacement part•  Package contains (1) Front Load Washer Drum Baffle Kit•  Tools Needed: Specialized Tools Read More Read Less

This Top Load Washer Suspension Spring Kit is a set of 6 springs that support the washer’s outer tub and keep it stable during the cleaning cycle, including when loads are u ...nbalanced. Each spring measures approximately 7-1/2" L. You'll release the tabs from the top of the washer and remove the front panel from the machine to access the old springs. You can remove all of the springs from the front of the washer, but, you can also remove the back panel of the appliance for easier access. Apply a small amount of grease to the bottom of the new springs before you reconnect them to the washer tub. Replacing this part will require basic hand tools, some disassembly of the washing machine and novice repair experience. You must unplug the washer or shut off the house circuit breaker for the appliance before installing this part. Also make sure you turn off the hot and cold water supplies. Helpful Tip: We also recommend using affresh® Washing Machine Cleaner* (item W10501250) once a month to help reduce odor-causing residue that can build up in your washing machine's drain without proper care. *affresh® brand products are owned and distributed by Whirlpool Corporation.Part Specification•  This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications•  This product is a replacement part•  Package contains (1) Top Load Washer Suspension Spring Kit•  Tools Needed: Multi screwdriver, putty knife, standard locking pliers and lubricating grease Read More Read Less

This Whirlpool Motor Spring and Guide Kit is designed to provide maximum performance and durability. The kit includes a motor spring, guide, mounting plate and screws, bearing ... retainer and screws, and the necessary seals and gaskets to ensure your appliance runs reliably and efficiently. This kit is compatible with many models of Whirlpool washers, dryers, and other appliances. With its easy installation and long-lasting construction, you can trust that your appliance will be running smoother than ever before. Make sure your appliance is running at peak performance with this sturdy and dependable Whirlpool Motor Spring and Guide Kit. We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs! Read More Read Less

The Front Load Dryer Tumbler Bearing Kit is in the front of the dryer and the dryer drum rides along it. The Bearing Kit helps the drum rotate smoothly and quietly. If your dr ...um is making uncommon noise during operation, replacing this part may alleviate the issue. This kit includes the bearing, a cork pad, glide, and two rivets. Note that dryers use two of these bearings in the front and both should be replaced at the same time. You'll remove the door and the front panel of your dryer to install this part. Installation of this part requires the use of a rivet gun. Replacing this part will require basic hand tools, some disassembly of the appliance and novice repair experience. You must unplug the appliance or shut off the house circuit breaker before installing this part.Part Specification•  This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications•  This product is a replacement part•  Package contains (1) Front Load Dryer Tumbler Bearing Kit•  Tools Needed: Multi screwdriver, 5/16" nut driver, rivet gun Read More Read Less

The Top Load Washing Machine Balance Spring Kit, Set of 3 keeps the weight of the wash tub balanced. If the end of the spring rusts and your tub sits off balance, this part ma ...y need to be replaced. To access this part, you'll first need to remove the control panel of the washer. Usually held in place by two screws, some washer models have trim covers that need to be removed before gaining access to the screws. You'll only use one spring from this kit of three depending on the color label on your motor. Replacing this part will require basic hand tools, some disassembly of the combination washer and novice repair experience. You must unplug the appliance or shut off the house circuit breaker before installing this part. Also make sure you turn off your hot and cold water supplies. Helpful Tip: We also recommend using affresh® Washing Machine Cleaner* (item W10501250) once a month to help reduce odor-causing residue that can build up in your washing machine's drain without proper care. *affresh® brand products are owned and distributed by Whirlpool Corporation.Part Specification•  This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications•  This product is a replacement part•  Package contains (1) Top Load Washing Machine Balance Spring Kit, Set of 3•  Tools Needed: Multi screwdriver Read More Read Less

The Dryer Drum Baffle attaches to the inside of the dryer drum and helps tumble clothing during the drying cycle. If your dryer’s current baffle has become broken or damaged ... causing the part to detach from the drum, replacing this part may alleviate the issue. Note that you may also need one or more screws (item WP33002973) to hold the new baffle against the drum. Replacing this part will require basic hand tools, some disassembly of the appliance and novice repair experience. You must unplug the appliance or shut off the house circuit breaker before installing this part.Part Specification•  This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications•  This product is a replacement part•  Package contains (1) Dryer Drum Baffle•  Tools Needed: Phillips-Head screwdriver, 5/16" nut driver Read More Read Less

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.