3956207 Whirlpool P-1 Basket O/S2
This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.
Weight : 80.5828 lbs
Dimension : 23.375 x 23.375 x 20.5
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.
Weight : 80.5828 lbs
Dimension : 23.375 x 23.375 x 20.5
Write Your Own Review
The following parts are replaced by this product
- 3357245
- 8271643
- 8271646
- 3347234
- 3347282
- 3347764
- 3348654
- 3349748
- 3350612
- 3350613
- 3357521
- 3363506
- 387713
- 8271644
- 8271647
How to Replace the Bosch 23001470 DOOR-OUTER
Replacing the Bosch 23001470 DOOR-OUTER is a relatively straightforward process, but it should be handled with care. This guide will walk you through the steps you need to follow to complete the replacement.
Tools You Will Need
Before beginning the process, make sure you have the following tools:
-Phillips head screwdriver
-Socket wrench
-Pliers
Step 1: Remove the Door Handle
Begin by using the Phillips head screwdriver to remove the screws that secure the door handle in place. Once they are removed, carefully pull off the handle from the door.
Step 2: Remove the Door Panel
Next, use the socket wrench to remove the bolts that secure the panel in place. Once all of the bolts are out, carefully pull off the panel.
Step 3: Disconnect the Wiring Harness
Now you need to disconnect the wiring harness. Use the pliers to carefully loosen the connector and then pull it off.
Step 4: Remove the Old Door-Outer
At this point, you can finally remove the old Bosch 23001470 DOOR-OUTER. Use the socket wrench to loosen the nuts that secure it in place and then pull off the component.
Step 5: Install the New Door-Outer
Now that the old component has been removed, you can install the new one. Insert the component into the opening and then secure it in place with the nuts.
Step 6: Reconnect the Wiring Harness
Reconnect the wiring harness to the component and then use the pliers to ensure that the connector is tight.
Step 7: Reinstall the Door Panel
Next, reinstall the door panel. Place it over the opening and then secure it in place with the bolts.
Step 8: Reinstall the Door Handle
Finally, reinstall the door handle. Line up the holes and then secure it in place with the screws.
Congratulations, you have now successfully replaced the Bosch 23001470 DOOR-OUTER!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Replacing the Bosch 23001470 DOOR-OUTER is a relatively straightforward process, but it should be handled with care. This guide will walk you through the steps you need to follow to complete the replacement.
Tools You Will Need
Before beginning the process, make sure you have the following tools:
-Phillips head screwdriver
-Socket wrench
-Pliers
Step 1: Remove the Door Handle
Begin by using the Phillips head screwdriver to remove the screws that secure the door handle in place. Once they are removed, carefully pull off the handle from the door.
Step 2: Remove the Door Panel
Next, use the socket wrench to remove the bolts that secure the panel in place. Once all of the bolts are out, carefully pull off the panel.
Step 3: Disconnect the Wiring Harness
Now you need to disconnect the wiring harness. Use the pliers to carefully loosen the connector and then pull it off.
Step 4: Remove the Old Door-Outer
At this point, you can finally remove the old Bosch 23001470 DOOR-OUTER. Use the socket wrench to loosen the nuts that secure it in place and then pull off the component.
Step 5: Install the New Door-Outer
Now that the old component has been removed, you can install the new one. Insert the component into the opening and then secure it in place with the nuts.
Step 6: Reconnect the Wiring Harness
Reconnect the wiring harness to the component and then use the pliers to ensure that the connector is tight.
Step 7: Reinstall the Door Panel
Next, reinstall the door panel. Place it over the opening and then secure it in place with the bolts.
Step 8: Reinstall the Door Handle
Finally, reinstall the door handle. Line up the holes and then secure it in place with the screws.
Congratulations, you have now successfully replaced the Bosch 23001470 DOOR-OUTER!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
