02-4369-01 Scotsman Ice Sump Clean-Out Cover

Replacing the Scotsman Ice 02-4369-01 SUMP CLEAN OUT COVER: DIY Instructions

Tools Needed:
- Screwdriver
- Pliers
- Wrench
- Socket Set

Step 1: Unplug the power to the ice machine before starting the repair process.

Step 2: Remove the screws located on the sides of the sump cover. Use a screwdriver for this step.

Step 3: Take out the sump cover from the ice machine. This can be done with a pair of pliers.

Step 4: Loosen and remove the four bolts that hold the sump clean out cover in place. Use a wrench or a socket set for this step.

Step 5: Install the new sump clean out cover with the screws and bolts. Make sure the screws and bolts are tight for secure installation.

Step 6: Reinstall the sump cover in the ice machine and secure it into place with the screws.

Step 7: Plug the power back in to the ice machine and turn it on.

Congratulations, you have successfully replaced the Scotsman Ice 02-4369-01 SUMP CLEAN OUT COVER!

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.