PA Categories

Drain Hose-Lower Assembly works with some models of Samsung Refrigerators

Drain Hose Assembly works with some models of Samsung Washers

Refrigerator Wire Harness Rail Assembly for some models of Samsung fridges.

4 Foot angle reinforced rubber washer for both hot and cold 5305516564 7/8 fittings on both ends. Reinforced Rubber. For both hot and cold water We are a Factory Authorized ...Parts Distributor for Frigidaire Electrolux. Read More Read Less

This Dishwasher Water Inlet Tubing carries water from the water inlet valve of the dishwasher to the tub. If the existing part is damaged and causing reduced water pressure, y ...ou may notice that your dishes aren't being cleaned properly. Replacing this part may alleviate the issue. The tube attaches to the bottom of the upper rack. Installing this part will require basic hand tools, some disassembly of the dishwasher and novice repair experience. Remember to unplug the dishwasher or shut off the house circuit breaker for the appliance before installing this part. Use caution when removing any pieces of hardware to prevent dropping them inside the sump at the bottom of the dishwasher. Helpful Tip: We also recommend using affresh® Dishwasher Cleaner (item W10282479) to help remove limescale and mineral build-up that can be unsightly and affect your dishwasher’s performance. *affresh® brand products are owned and distributed by Whirlpool Corporation.Part Specification•  This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications•  This product is a replacement part•  Package contains (1) Dishwasher Water Inlet Tubing•  Tools Needed: Multi screwdriver, standard pliers Read More Read Less

The French Door Refrigerator Wire Harness supplies power to the evaporator motor of the appliance. If your refrigerator isn’t cooling properly or the fan isn’t blowing coo ...l air, replacing this part could alleviate these issues. Use a multi-meter (item 430572) to test the fan motor, electronic control board and wiring harness to determine which part is malfunctioning before you begin the repair. Installing this part will require basic hand tools, some disassembly of the refrigerator and novice repair experience. Remember to unplug the refrigerator or shut off the house circuit breaker for the appliance before installing this part. Helpful Tips: Take a digital photo of the existing wire harness before you remove it to aid with the installation of the new part.Part Specification•  This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications•  This product is a replacement part•  Package contains (1) French Door Refrigerator Wire Harness•  Tools Needed: Multi screwdriver Read More Read Less

This is a genuine OEM part that works for some models of Frigidaire, Electrolux, Gibson, Kelvinator, Westinghouse, Crosley, Kenmore, and Tappan models.

This is a genuine OEM item made by Bosch

This is a genuine OEM item made by Samsung

This Range Element Receptacle and Wire Kit connects the surface elements of your range to the wiring harness. This kit includes (2) brackets (you'll only use one that matches ...your receptacle),(2) wires, (2) wire nuts, (2) pieces of heat-shrink wrap, and the receptacle. If your element is not heating, the connections may have shorted out. To access the part, remove the element that isn't working properly from your range, and the drip pan. Lift the top of the range and unscrew the old receptacle block. Replacing this part will require basic hand tools, some disassembly of the range and novice repair experience. You must unplug the range or shut off the house circuit breaker for the appliance before installing this part. Recommended Item: Wire Splicing Tool, 8-1/4". This stripper specializes in stripping and cutting wire. This tool is designed with a lean nose for pulling and looping wire and equipped with precision ground cutters.Part Specification•  This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications•  This product is a replacement part•  Package contains (1) Range Element Receptacle and Wire Kit•  Tools Needed: Multi screwdriver, wire strippers, heat gun Read More Read Less