204690 Speed Queen V324J7 Washer Poly Belt
204690 Speed Queen Washer Poly Belt V324J7
Weight : 1.413800 lbs
Dimension : 8.425100 x 5.866100 x 3.976300
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
204690 Speed Queen Washer Poly Belt V324J7
Weight : 1.413800 lbs
Dimension : 8.425100 x 5.866100 x 3.976300
Write Your Own Review
The following parts are replaced by this product
- 204008
Step 1: Unplug the Speed Queen Washer
Before beginning any repair work, it is essential to unplug the Speed Queen washer from its power source. This helps to prevent any electric shock that may occur during the repair process.
Step 2: Remove the front and top panels
Using a Phillips screwdriver, unscrew the 4 screws located at the back of the washer. This will allow you to remove the front and top panels. Be sure to keep track of the screws and any other parts that may come loose during this process.
Step 3: Locate the belt
Once the front and top panels are removed, you will be able to locate the belt. It is usually located behind the drum and around the motor pulley.
Step 4: Remove the old belt
Using pliers, carefully remove the old belt from around the motor pulley. Be sure to take note of the direction the belt is running in as this will help you when replacing it with the new belt.
Step 5: Install the new belt
Take the new belt, 204690 Speed Queen Washer Poly Belt V324J7, and fit it on the motor pulley. Make sure the belt is running in the same direction as the old belt and tighten it firmly in place.
Step 6: Reassemble the washer
Once the new belt has been securely fitted, replace the top and front panels and tighten the screws using a Phillips screwdriver.
Step 7: Plug in the washer
Finally, plug the washer back into its power source and test the new belt to ensure it is functioning properly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Before beginning any repair work, it is essential to unplug the Speed Queen washer from its power source. This helps to prevent any electric shock that may occur during the repair process.
Step 2: Remove the front and top panels
Using a Phillips screwdriver, unscrew the 4 screws located at the back of the washer. This will allow you to remove the front and top panels. Be sure to keep track of the screws and any other parts that may come loose during this process.
Step 3: Locate the belt
Once the front and top panels are removed, you will be able to locate the belt. It is usually located behind the drum and around the motor pulley.
Step 4: Remove the old belt
Using pliers, carefully remove the old belt from around the motor pulley. Be sure to take note of the direction the belt is running in as this will help you when replacing it with the new belt.
Step 5: Install the new belt
Take the new belt, 204690 Speed Queen Washer Poly Belt V324J7, and fit it on the motor pulley. Make sure the belt is running in the same direction as the old belt and tighten it firmly in place.
Step 6: Reassemble the washer
Once the new belt has been securely fitted, replace the top and front panels and tighten the screws using a Phillips screwdriver.
Step 7: Plug in the washer
Finally, plug the washer back into its power source and test the new belt to ensure it is functioning properly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
