203741 Speed Queen Mixing Valve 100-127V
203741 Speed Queen 100-127V Mixing Valve
Weight : 0.433400 lbs
Dimension : 5.078700 x 3.503900 x 3.385800
203741 Speed Queen 100-127V Mixing Valve
Weight : 0.433400 lbs
Dimension : 5.078700 x 3.503900 x 3.385800
Write Your Own Review
Step 1:Turn off the water to the washing machine. Open the shutoff valves or turn off the designated circuit breaker in order to completely cut off power to the washer.
Step 2:Unplug the washer from the outlet and remove any hoses or cords connected to the machine.
Step 3:Fully open the machine's access panel to expose the inner workings of the washer.
Step 4:Locate the Speed Queen 203741 valve and note its connection point. Unscrew and remove the part with a wrench or pliers.
Step 5:Clean the area surrounding the removed valve with warm soapy water and a cloth.
Step 6:Set the new Speed Queen 203741 valve into place, latching it to the corresponding connection points.
Step 7:Tighten the valve into place with the wrench or pliers.
Step 8:Close the washer's access panel before plugging the washer back into the outlet.
Step 9:Reattach any hoses or cords that were disconnected during the process.
Step 10:Turn on the water supply to the washer and press the "Power" button to turn on the machine.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Step 2:Unplug the washer from the outlet and remove any hoses or cords connected to the machine.
Step 3:Fully open the machine's access panel to expose the inner workings of the washer.
Step 4:Locate the Speed Queen 203741 valve and note its connection point. Unscrew and remove the part with a wrench or pliers.
Step 5:Clean the area surrounding the removed valve with warm soapy water and a cloth.
Step 6:Set the new Speed Queen 203741 valve into place, latching it to the corresponding connection points.
Step 7:Tighten the valve into place with the wrench or pliers.
Step 8:Close the washer's access panel before plugging the washer back into the outlet.
Step 9:Reattach any hoses or cords that were disconnected during the process.
Step 10:Turn on the water supply to the washer and press the "Power" button to turn on the machine.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
