DG96-00110F Samsung Oven Convection Motor Assembly
This convection fan assembly is for ranges. Convection fan assembly DG96-00110F circulates hot air through the oven for even heating.
Weight : 0.7852 lbs
Dimension : 5.3937 x 5.0393 x 4.0157
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
This convection fan assembly is for ranges. Convection fan assembly DG96-00110F circulates hot air through the oven for even heating.
Weight : 0.7852 lbs
Dimension : 5.3937 x 5.0393 x 4.0157
Write Your Own Review
The following parts are replaced by this product
- 111979
Replacing the DG96-00110F Samsung Oven Convection Motor Assembly
Follow these steps to replace the DG96-00110F Samsung Oven Convection Motor Assembly.
Step 1: Prepare your tools and workspace. Gather a Phillips screwdriver, flathead screwdriver, and pair of needle-nose pliers. Find a well-lit, safe and spacious workspace.
Step 2: Unplug the Samsung oven. Locate the power cord and unplug it from the wall outlet.
Step 3: Remove the outer housing. This can be done by using the Phillips screwdriver to remove the screws around the perimeter of the oven door. Once the screws are removed, lift the top off of the oven to access the inner components.
Step 4: Remove the old convection fan motor assembly. Locate the two mounting screws that are securing the fan motor to the oven. Use the flathead screwdriver to remove the screws and lift the motor out of the oven.
Step 5: Install the new motor assembly. Insert the new motor assembly into the oven and secure it with the mounting screws.
Step 6: Reassemble the oven and plug it in. Replace the outer housing and secure it with the screws. Plug the power cord back into the wall outlet.
Step 7: Test the new convection fan motor assembly. Set the controls for the oven to convection mode and make sure the fan is running.
Follow these simple steps to successfully replace the DG96-00110F Samsung Oven Convection Motor Assembly. With a little patience and precision, you’ll have your oven up and running in no time.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Follow these steps to replace the DG96-00110F Samsung Oven Convection Motor Assembly.
Step 1: Prepare your tools and workspace. Gather a Phillips screwdriver, flathead screwdriver, and pair of needle-nose pliers. Find a well-lit, safe and spacious workspace.
Step 2: Unplug the Samsung oven. Locate the power cord and unplug it from the wall outlet.
Step 3: Remove the outer housing. This can be done by using the Phillips screwdriver to remove the screws around the perimeter of the oven door. Once the screws are removed, lift the top off of the oven to access the inner components.
Step 4: Remove the old convection fan motor assembly. Locate the two mounting screws that are securing the fan motor to the oven. Use the flathead screwdriver to remove the screws and lift the motor out of the oven.
Step 5: Install the new motor assembly. Insert the new motor assembly into the oven and secure it with the mounting screws.
Step 6: Reassemble the oven and plug it in. Replace the outer housing and secure it with the screws. Plug the power cord back into the wall outlet.
Step 7: Test the new convection fan motor assembly. Set the controls for the oven to convection mode and make sure the fan is running.
Follow these simple steps to successfully replace the DG96-00110F Samsung Oven Convection Motor Assembly. With a little patience and precision, you’ll have your oven up and running in no time.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
