DE81-07992A Samsung Rack Glide 30 Inch

Replacing the Samsung DE81-07992A SVC-RACK GLIDE 30IN

Tools Needed:
1. Philips Screwdriver
2. Gloves
3. Safety Glasses

Instructions:
1. To start, unplug your appliance from the power source and disconnect any water lines before beginning.
2. Put on your safety goggles and gloves for protection.
3. Remove the screws securing the drawer track to the appliance.
4. Once the screws are removed, lift the track off the appliance.
5. Take the replacement Samsung DE81-07992A SVC-RACK GLIDE 30IN and line it up with the holes in the appliance where the drawer track was.
6. Secure the track firmly to the machine with the screws you removed earlier.
7. Replace the drawer on to the track and test that it slides smoothly.
8. Plug in the appliance, reconnect any water lines, and put your tools away.


Congratulations! You have successfully replaced the Samsung DE81-07992A SVC-RACK GLIDE 30IN.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.