DE81-07068A Samsung Oven Double Control

Replacing the Samsung DE81-07068A SVC-OVEN CONTROL DOUBLE ASSY with a New One

1. Unplug the oven from the wall outlet and remove the racks inside the oven.

2. Remove the screws located on the back of the control panel. Gently pull out the control panel to expose the oven control double assy.

3. Disconnect the wiring harness that is connected to the oven control double assy by pressing the tab back and disconnecting the wiring harness.

4. Carefully remove the oven control double assy.

5. Install the new oven control double assy by connecting the wiring harness and attaching the screws to secure the oven control panel.

6. Reinsert the racks into the oven and plug the oven back into the wall outlet.

7. Turn on the oven and test it to ensure the new oven control double assy is working properly.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.