DE81-06682A Samsung Range Service LED Isolator Board
SVC-Board LED Isolator.
Weight : 0.189800 lbs
Dimension : 4.212500 x 3.700700 x 1.692900
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
SVC-Board LED Isolator.
Weight : 0.189800 lbs
Dimension : 4.212500 x 3.700700 x 1.692900
Write Your Own Review
The following parts are replaced by this product
- 106104
- 103720
Replacing a DE81-06682A Samsung Range SVC-Board LED Isolator
Tools You Will Need:
• Phillips screwdriver
• Flathead screwdriver
• Wire cutters
• Needle nose pliers
Instructions:
1. Unplug the oven’s power cord from the wall outlet.
2. Remove the screws that secure the back panel of the oven with the Phillips screwdriver.
3. Carefully remove the back panel and set aside.
4. Locate the SVC-Board LED Isolator on the oven’s circuit board.
5. Use a flathead screwdriver to carefully remove the existing LED Isolator from its socket on the circuit board.
6. Cut the wires attached to the LED Isolator with the wire cutters.
7. Strip the ends of the wires with the needle nose pliers.
8. Grab the new DE81-06682A Samsung Range SVC-Board LED Isolator.
9. Plug the stripped wire ends into their corresponding slots on the new LED Isolator.
10. Carefully insert the new LED Isolator into its socket on the oven’s circuit board.
11. Replace the back panel and secure it with the screws.
12. Plug the oven’s power cord back into the wall outlet.
Your new DE81-06682A Samsung Range SVC-Board LED Isolator is now installed!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Tools You Will Need:
• Phillips screwdriver
• Flathead screwdriver
• Wire cutters
• Needle nose pliers
Instructions:
1. Unplug the oven’s power cord from the wall outlet.
2. Remove the screws that secure the back panel of the oven with the Phillips screwdriver.
3. Carefully remove the back panel and set aside.
4. Locate the SVC-Board LED Isolator on the oven’s circuit board.
5. Use a flathead screwdriver to carefully remove the existing LED Isolator from its socket on the circuit board.
6. Cut the wires attached to the LED Isolator with the wire cutters.
7. Strip the ends of the wires with the needle nose pliers.
8. Grab the new DE81-06682A Samsung Range SVC-Board LED Isolator.
9. Plug the stripped wire ends into their corresponding slots on the new LED Isolator.
10. Carefully insert the new LED Isolator into its socket on the oven’s circuit board.
11. Replace the back panel and secure it with the screws.
12. Plug the oven’s power cord back into the wall outlet.
Your new DE81-06682A Samsung Range SVC-Board LED Isolator is now installed!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
