DE81-06566A Samsung Assembly Intake Grille 30

DIY Instructions: How to Replace a Samsung DE81-06566A SVC-ASSY INTAKE GRILL 30IN

Replacing the Samsung DE81-06566A SVC-ASSY INTAKE GRILL 30IN doesn’t need to be an overwhelming task, if you follow these simple steps. With the right tools and some patience, you’ll be able to make the switch quickly and easily.

Tools Needed:

- Phillips screwdriver

- Flat head screwdriver

- Pliers

- Replacement Samsung DE81-06566A SVC-ASSY INTAKE GRILL 30IN

Instructions:

1. Unplug the appliance from the wall. Remove all the screws located on the top and bottom of the intake grill using the Phillips screwdriver.

2. Insert the flat head screwdriver into the seam of each side of the grill and pry it open. Remove the two panels from the appliance and set them aside.

3. Locate the old Samsung DE81-06566A SVC-ASSY INTAKE GRILL 30IN inside the appliance. Disconnect the four wires that are connected to it and then unscrew the mounting bracket holding the grill in place.

4. Grab the new Samsung DE81-06566A SVC-ASSY INTAKE GRILL 30IN and place it into the appliance. Secure it with the mounting bracket that was used to hold the old grill.

5. Connect the four wires to the new grill. Make sure they are securely fastened.

6. Place the top and bottom panels onto the appliance and secure them with the screws removed earlier.

7. Plug the appliance back into the wall and turn it on to test. You can now enjoy your brand-new Samsung DE81-06566A SVC-ASSY INTAKE GRILL 30IN!

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.