DE81-05573A Samsung Assembly Broil Eors136SCH

Step 1: Preparation

Before starting on any DIY project, it’s important to make sure that you have all of the necessary tools and materials. For the replacement of your Samsung DE81-05573A SVC-ASSY BROIL, you will need the following: Philips screwdriver, putty knife, work gloves, and a new SVC-ASSY BROIL.

Step 2: Disassembly

Start by unplugging the electrical cord from the wall. To take apart the assembly, you’ll need to remove the screws from the back panel. Using your Phillips screwdriver, unscrew the four screws; two on either side. Carefully pull down the back panel and set aside for now.

Step 3: Remove the SVC-ASSY BROIL

Now, locate the SVC-ASSY BROIL. It is a black box with several wires coming out of the back. Using your putty knife, unscrew the four screws and carefully remove the box. Pull out all of the wires and set aside.

Step 4: Install the New SVC-ASSY BROIL

Now, grab the new SVC-ASSY BROIL. Connect all of the wires back in their original places. Be careful not to mix them up. Then, carefully fit the new box into the space and secure with the four screws.

Step 5: Reassemble

Once the new box has been installed, it’s time to reassemble everything. Place the back panel back in its place and secure with the two screws. Make sure everything is in place before you plug the electrical cord back in.

And there you have it—you’ve successfully replaced the Samsung DE81-05573A SVC-ASSY BROIL. Congratulations!

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.