DE81-03987A Samsung Filter Power Pack Double
Power pack filter works with some Dacor models of range vent hoods.
Weight : 1.1616 lbs
Dimension : 16.5354 x 9.9212 x 0.9842
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
Power pack filter works with some Dacor models of range vent hoods.
Weight : 1.1616 lbs
Dimension : 16.5354 x 9.9212 x 0.9842
Write Your Own Review
The following parts are replaced by this product
- 72263
Replacing the Samsung DE81-03987A SVC-FILTER POWER PACK
Before you start replacing the Samsung DE81-03987A SVC-FILTER POWER PACK, make sure that you have all the necessary tools and replacement parts needed for the repair.
Tools Needed:
- Phillips screwdriver
- Flat screwdriver
- Small pliers
- Flashlight
Replacement Parts Needed:
- Samsung DE81-03987A SVC-FILTER POWER PACK
Step 1: Unplug the power cord from the wall outlet.
Step 2: Remove the screws on the back side of the SVC-FILTER POWER PACK with a Phillips screwdriver.
Step 3: After all the screws have been removed, carefully remove the cover of the SVC-FILTER POWER PACK using a flat screwdriver.
Step 4: Disconnect all cables and wires connected to the SVC-FILTER POWER PACK. Pay close attention to the color code of each cable or wire so you can reconnect them properly when installing the new SVC-FILTER POWER PACK.
Step 5: Use a small pair of pliers to remove the metal clips and plastic retainers if any are present.
Step 6: Carefully pull out the old SVC-FILTER POWER PACK from its housing. Make sure not to damage any other components in the process.
Step 7: Check that all parts are in good condition. If there are any damaged or worn-out parts, replace them before reassembling the SVC-FILTER POWER PACK.
Step 8: Insert the new SVC-FILTER POWER PACK into its housing. Make sure that the installation is done correctly and securely.
Step 9: Connect all cables and wires according to the color code indicated earlier.
Step 10: Use the metal clips and plastic retainers to secure the new SVC-FILTER POWER PACK into place.
Step 11: Put back the cover of the SVC-FILTER POWER PACK and tighten the screws to secure it.
Step 12: Plug the power cord back into the wall outlet and turn on the device.
Congratulations! You have successfully replaced your Samsung DE81-03987A SVC-FILTER POWER PACK.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Before you start replacing the Samsung DE81-03987A SVC-FILTER POWER PACK, make sure that you have all the necessary tools and replacement parts needed for the repair.
Tools Needed:
- Phillips screwdriver
- Flat screwdriver
- Small pliers
- Flashlight
Replacement Parts Needed:
- Samsung DE81-03987A SVC-FILTER POWER PACK
Step 1: Unplug the power cord from the wall outlet.
Step 2: Remove the screws on the back side of the SVC-FILTER POWER PACK with a Phillips screwdriver.
Step 3: After all the screws have been removed, carefully remove the cover of the SVC-FILTER POWER PACK using a flat screwdriver.
Step 4: Disconnect all cables and wires connected to the SVC-FILTER POWER PACK. Pay close attention to the color code of each cable or wire so you can reconnect them properly when installing the new SVC-FILTER POWER PACK.
Step 5: Use a small pair of pliers to remove the metal clips and plastic retainers if any are present.
Step 6: Carefully pull out the old SVC-FILTER POWER PACK from its housing. Make sure not to damage any other components in the process.
Step 7: Check that all parts are in good condition. If there are any damaged or worn-out parts, replace them before reassembling the SVC-FILTER POWER PACK.
Step 8: Insert the new SVC-FILTER POWER PACK into its housing. Make sure that the installation is done correctly and securely.
Step 9: Connect all cables and wires according to the color code indicated earlier.
Step 10: Use the metal clips and plastic retainers to secure the new SVC-FILTER POWER PACK into place.
Step 11: Put back the cover of the SVC-FILTER POWER PACK and tighten the screws to secure it.
Step 12: Plug the power cord back into the wall outlet and turn on the device.
Congratulations! You have successfully replaced your Samsung DE81-03987A SVC-FILTER POWER PACK.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
