DE81-03487A Samsung Gasket Washer Graphite Kit

DIY Guide to Replacing the Samsung DE81-03487A SVC-GASKET WASHER GRPHTE KIT

This guide provides a step-by-step DIY guide to replacing the Samsung DE81-03487A SVC-GASKET WASHER GRPHTE KIT. With the right tools and careful preparation, this can be a relatively easy task for any do-it-yourself enthusiast.

Tools Needed:
-Flathead screwdriver
-Phillips head screwdriver
-Adjustable wrench
-Replacement SVC-Gasket Washing Group Kit (Samsung DE81-03487A)


Step 1: Shut off power to the washing machine. Make sure it is unplugged from the wall socket and/or switch off the breaker in the fuse box.

Step 2: Take off the bottom panel of the washer by using a flathead screwdriver to remove the cover screws.

Step 3: Use a Phillips head screwdriver to disconnect the control panel from the cabinet by unscrewing the mounting screws.

Step 4: Carefully remove the old SVC-Gasket Washing Group Kit (Samsung DE81-03487A). If necessary, use an adjustable wrench to loosen any screws or nuts that are holding it in place.

Step 5: Place the new SVC-Gasket Washing Group Kit (Samsung DE81-03487A) in the same exact spot as the old gasket and use a Phillips head screwdriver to attach the new gasket kit’s mounting screws.

Step 6: Reattach the control panel to the cabinet with the Phillips head screwdriver.

Step 7: Put the bottom panel back on to the washer and secure it with the flathead screwdriver.

Step 8: Restore power to the washing machine.

Congratulations! You should now have successfully replaced the Samsung DE81-03487A SVC-GASKET WASHER GRPHTE KIT.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.