DE31-10154D Samsung Turntable Drive Motor
Samsung Maytag Whirlpool Amana Admiral Sears Kenmore MICROWAVE OVEN TURNTABLE DRIVE MOTOR DE31-10154D
Weight : 0.086300 lbs
Dimension : 2.000000 x 3.000000 x 2.000000
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
Samsung Maytag Whirlpool Amana Admiral Sears Kenmore MICROWAVE OVEN TURNTABLE DRIVE MOTOR DE31-10154D
Weight : 0.086300 lbs
Dimension : 2.000000 x 3.000000 x 2.000000
Write Your Own Review
The following parts are replaced by this product
- DE31-10154A
DIY Instructions for Replacing the DE31-10154D Samsung Turntable Drive Motor
Replacing a Samsung turntable drive motor can seem like a daunting task at first, but with the right tools and a bit of patience, anyone can do it. This guide will provide you with a step-by-step process to help you safely and effectively replace the DE31-10154D Samsung Turntable Drive Motor.
Materials Needed
• DE31-10154D Replacement Motor
• Phillips Screwdriver
• Rubber Mallet
• Pliers
• Wire Cutters
Step 1: Unplug the Turntable
To begin, unplug the power cord from the wall outlet.
Step 2: Open the Bottom Cover
Using a Phillips screwdriver, unscrew the screws that hold the bottom cover in place and remove the cover.
Step 3: Remove the Motor
Locate the motor and disconnect its electrical wires. To remove the motor, use pliers to loosen and remove the two mounting screws. Gently pull the motor out from the turntable.
Step 4: Install the New Motor
Insert the new motor into the turntable and reattach the two mounting screws. Use a rubber mallet if necessary to secure the screws.
Step 5: Reconnect the Wires
Reconnect the wires to the new motor. Be sure to use wire cutters to trim any excess length.
Step 6: Test the Turntable
Plug the turntable back in and test it to ensure it works properly.
Step 7: Replace the Bottom Cover
Once you have confirmed the turntable is working as expected, replace the bottom cover and secure it with the screws.
Congratulations! You have successfully replaced the DE31-10154D Samsung Turntable Drive Motor.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Replacing a Samsung turntable drive motor can seem like a daunting task at first, but with the right tools and a bit of patience, anyone can do it. This guide will provide you with a step-by-step process to help you safely and effectively replace the DE31-10154D Samsung Turntable Drive Motor.
Materials Needed
• DE31-10154D Replacement Motor
• Phillips Screwdriver
• Rubber Mallet
• Pliers
• Wire Cutters
Step 1: Unplug the Turntable
To begin, unplug the power cord from the wall outlet.
Step 2: Open the Bottom Cover
Using a Phillips screwdriver, unscrew the screws that hold the bottom cover in place and remove the cover.
Step 3: Remove the Motor
Locate the motor and disconnect its electrical wires. To remove the motor, use pliers to loosen and remove the two mounting screws. Gently pull the motor out from the turntable.
Step 4: Install the New Motor
Insert the new motor into the turntable and reattach the two mounting screws. Use a rubber mallet if necessary to secure the screws.
Step 5: Reconnect the Wires
Reconnect the wires to the new motor. Be sure to use wire cutters to trim any excess length.
Step 6: Test the Turntable
Plug the turntable back in and test it to ensure it works properly.
Step 7: Replace the Bottom Cover
Once you have confirmed the turntable is working as expected, replace the bottom cover and secure it with the screws.
Congratulations! You have successfully replaced the DE31-10154D Samsung Turntable Drive Motor.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
