DC97-12534M Samsung Washer Drain Hose Assembly
Part #: SMG DC97-12534M
Drain Hose Assembly works with some models of Samsung Washers
Drain Hose Assembly works with some models of Samsung Washers
Write Your Own Review
DIY Instructions for Replacing the DC97-12534M Samsung Washer Drain Hose Assembly
Before starting, make sure to properly disconnect power to the washer.
Step 1: Gather all of the tools and materials you will need to complete the job. For this project, you will need a Phillips screwdriver and the DC97-12534M Samsung Washer Drain Hose Assembly.
Step 2: Before beginning, locate the drain hose located on the inside wall of the washer. This is typically located in the back, underneath the washer lid.
Step 3: Once you have located the drain hose, unscrew the clamp that is holding it in place using your Phillips screwdriver.
Step 4: Remove the old drain hose from the washer.
Step 5: Insert the new DC97-12534M Samsung Washer Drain Hose Assembly into the opening in the washer.
Step 6: Secure the new drain hose in place by reattaching the clamp you removed in Step 3.
Step 7: Reconnect power to the washer and check for any leaks.
Congratulations! You've successfully replaced the DC97-12534M Samsung Washer Drain Hose Assembly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Before starting, make sure to properly disconnect power to the washer.
Step 1: Gather all of the tools and materials you will need to complete the job. For this project, you will need a Phillips screwdriver and the DC97-12534M Samsung Washer Drain Hose Assembly.
Step 2: Before beginning, locate the drain hose located on the inside wall of the washer. This is typically located in the back, underneath the washer lid.
Step 3: Once you have located the drain hose, unscrew the clamp that is holding it in place using your Phillips screwdriver.
Step 4: Remove the old drain hose from the washer.
Step 5: Insert the new DC97-12534M Samsung Washer Drain Hose Assembly into the opening in the washer.
Step 6: Secure the new drain hose in place by reattaching the clamp you removed in Step 3.
Step 7: Reconnect power to the washer and check for any leaks.
Congratulations! You've successfully replaced the DC97-12534M Samsung Washer Drain Hose Assembly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.