DC97-05280W Samsung Washer Damper Assembly (Pkg of 1)
Suspension rod damper assembly for some models of Samsung washing machines.
Weight : 0.357700 lbs
Dimension : 26.181100 x 1.378000 x 1.378000
Suspension rod damper assembly for some models of Samsung washing machines.
Weight : 0.357700 lbs
Dimension : 26.181100 x 1.378000 x 1.378000
Write Your Own Review
How to Replace the DC97-05280W Samsung Washer Suspension Rod Damper Assembly
Introduction
If your Samsung front-loading washing machine isn't spinning or agitating properly, it could be a sign that your DC97-05280W Samsung Washer Suspension Rod Damper Assembly needs to be replaced. This guide will provide you with easy-to-follow instructions so you can replace the damper assembly yourself.
Tools and Materials Needed
• Philips screwdriver
• Torx screwdriver
• Pliers
• DC97-05280W Samsung Washer Suspension Rod Damper Assembly
Instructions
1. Unplug your washing machine from the wall and turn off the water supply.
2. Carefully tilt your washer forward so you can access the underside.
3. Using a Philips screwdriver, remove the two screws that secure the cabinet to the bottom of the washer.
4. Remove the cabinet from the washer and set aside.
5. You should now be able to see the suspension rod and damper assembly. Using a Torx screwdriver, remove the four screws that secure the assembly in place.
6. Take note of the orientation of the damper assembly and then carefully pull it off the suspension rod.
7. Next, take the new DC97-05280W Samsung Washer Suspension Rod Damper Assembly and align it with the suspension rod. Secure in place with the four screws.
8. Use pliers to connect the wires to the damper assembly.
9. Carefully replace the cabinet to the washer and secure in place with the two screws.
10. Reconnect the washer to the wall and turn the water on.
11. Plug the washer in and test to make sure it's spinning and agitating normally.
Conclusion
Replacing the DC97-05280W Samsung Washer Suspension Rod Damper Assembly is an easy DIY repair job that most people can complete in an hour or less. Just remember to unplug the washer from the wall before you begin and to take note of the orientation of the damper assembly before you pull it off. Good luck!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Introduction
If your Samsung front-loading washing machine isn't spinning or agitating properly, it could be a sign that your DC97-05280W Samsung Washer Suspension Rod Damper Assembly needs to be replaced. This guide will provide you with easy-to-follow instructions so you can replace the damper assembly yourself.
Tools and Materials Needed
• Philips screwdriver
• Torx screwdriver
• Pliers
• DC97-05280W Samsung Washer Suspension Rod Damper Assembly
Instructions
1. Unplug your washing machine from the wall and turn off the water supply.
2. Carefully tilt your washer forward so you can access the underside.
3. Using a Philips screwdriver, remove the two screws that secure the cabinet to the bottom of the washer.
4. Remove the cabinet from the washer and set aside.
5. You should now be able to see the suspension rod and damper assembly. Using a Torx screwdriver, remove the four screws that secure the assembly in place.
6. Take note of the orientation of the damper assembly and then carefully pull it off the suspension rod.
7. Next, take the new DC97-05280W Samsung Washer Suspension Rod Damper Assembly and align it with the suspension rod. Secure in place with the four screws.
8. Use pliers to connect the wires to the damper assembly.
9. Carefully replace the cabinet to the washer and secure in place with the two screws.
10. Reconnect the washer to the wall and turn the water on.
11. Plug the washer in and test to make sure it's spinning and agitating normally.
Conclusion
Replacing the DC97-05280W Samsung Washer Suspension Rod Damper Assembly is an easy DIY repair job that most people can complete in an hour or less. Just remember to unplug the washer from the wall before you begin and to take note of the orientation of the damper assembly before you pull it off. Good luck!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
