DC92-01998C Samsung Washer Electronic Control Board
The Samsung DC92-01998C ASSY PCB MAIN;OWM_INV,WA8600 We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Weight : 2.721200 lbs
Dimension : 5.748000 x 3.425100 x 19.212500
The Samsung DC92-01998C ASSY PCB MAIN;OWM_INV,WA8600 We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Weight : 2.721200 lbs
Dimension : 5.748000 x 3.425100 x 19.212500
Write Your Own Review
Step 1: Prepare for the Replacement
To replace your Samsung DC92-01998C ASSY PCB MAIN;OWM_INV,WA8600, you will need a Phillips screwdriver, scissors, and an anti-static wrist strap.
Step 2: Unplug the Appliance
Before you begin, make sure to unplug the appliance to ensure your safety and protect it from power surge.
Step 3: Remove the Cover
Using the Phillips screwdriver, remove the screws that secure the cover of the PCB Main Board.
Step 4: Replace the Part
Once the cover is out of the way, carefully disconnect the wires leading away from the PCB Main Board. Be sure to note where each wire was connected in case you need to make reference later. Then, carefully pull out the board, and insert the new one.
Step 5: Reconnect the Wires
Reconnect all the wires back to the new PCB Main Board. Make sure the connections are tight, and take time to ensure everything is securely reconnected.
Step 6: Reattach the Cover
Once the wires are properly secured, reattach the cover back onto the PCB Main Board. Screw the cover into place with the Phillips screwdriver.
Step 7: Test the System
Once the PCB Main Board has been replaced, plug the appliance back in and test its functionality.
Congratulations! You have successfully replaced the Samsung DC92-01998C ASSY PCB MAIN;OWM_INV,WA8600.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
To replace your Samsung DC92-01998C ASSY PCB MAIN;OWM_INV,WA8600, you will need a Phillips screwdriver, scissors, and an anti-static wrist strap.
Step 2: Unplug the Appliance
Before you begin, make sure to unplug the appliance to ensure your safety and protect it from power surge.
Step 3: Remove the Cover
Using the Phillips screwdriver, remove the screws that secure the cover of the PCB Main Board.
Step 4: Replace the Part
Once the cover is out of the way, carefully disconnect the wires leading away from the PCB Main Board. Be sure to note where each wire was connected in case you need to make reference later. Then, carefully pull out the board, and insert the new one.
Step 5: Reconnect the Wires
Reconnect all the wires back to the new PCB Main Board. Make sure the connections are tight, and take time to ensure everything is securely reconnected.
Step 6: Reattach the Cover
Once the wires are properly secured, reattach the cover back onto the PCB Main Board. Screw the cover into place with the Phillips screwdriver.
Step 7: Test the System
Once the PCB Main Board has been replaced, plug the appliance back in and test its functionality.
Congratulations! You have successfully replaced the Samsung DC92-01998C ASSY PCB MAIN;OWM_INV,WA8600.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
