DC67-00444A Samsung Washer Max Fill Cap Drawer
Washer max fill cap drawer for some models of Samsung washing machines.
Weight : 0.0105 lbs
Dimension : 1.1811 x 1.5748 x 0.7874
Washer max fill cap drawer for some models of Samsung washing machines.
Weight : 0.0105 lbs
Dimension : 1.1811 x 1.5748 x 0.7874
Write Your Own Review
1. Start by unplugging your Samsung Washer and turn off the water supply.
2. Remove the front access panel of your Washer to reveal the cap drawer assembly.
3. With a Phillips head screwdriver, remove the three screws that hold the Max Fill Cap Drawer in place.
4. Carefully pull the Max Fill Cap Drawer out of the Washer, taking care not to damage any other components inside the Washer cabinet.
5. Disassemble the two base pieces connected to the Max Fill Cap Drawer with a flathead screwdriver and remove the old Drawer from the assembly.
6. Insert the new DC67-00444A Samsung Max Fill Cap Drawer into the assembly and then reattach the two base pieces with the flathead screwdriver.
7. Place the assembly back into the Washer cabinet and secure it with the three Phillips head screws.
8. Reattach the Washer's front access panel and plug the Washer back in.
9. Turn on the water supply and make sure the new DC67-00444A Samsung Max Fill Cap Drawer is working properly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
2. Remove the front access panel of your Washer to reveal the cap drawer assembly.
3. With a Phillips head screwdriver, remove the three screws that hold the Max Fill Cap Drawer in place.
4. Carefully pull the Max Fill Cap Drawer out of the Washer, taking care not to damage any other components inside the Washer cabinet.
5. Disassemble the two base pieces connected to the Max Fill Cap Drawer with a flathead screwdriver and remove the old Drawer from the assembly.
6. Insert the new DC67-00444A Samsung Max Fill Cap Drawer into the assembly and then reattach the two base pieces with the flathead screwdriver.
7. Place the assembly back into the Washer cabinet and secure it with the three Phillips head screws.
8. Reattach the Washer's front access panel and plug the Washer back in.
9. Turn on the water supply and make sure the new DC67-00444A Samsung Max Fill Cap Drawer is working properly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
