DC66-00470A Samsung Washer Shock Absorber
Samsung Sears Kenmore Clothes Washer Washing Machine SHOCK ABSORBER DC66-00470A
Samsung Sears Kenmore Clothes Washer Washing Machine SHOCK ABSORBER DC66-00470A
Write Your Own Review
Instructions for Replacing the DC66-00470A Samsung Washer SHOCK ABSORBER
1. Start by unplugging the washer from its power source.
2. Lift the top of the washer and take off any screws securing the housing.
3. Remove the control panel by taking out any screws that may be holding it in place.
4. Locate the shock absorbers and remove any screws holding them in place.
5. Pull the old shock absorbers out, then insert the new ones.
6. Put all screws back in place and replace the housing and control panel.
7. Plug the washer back in and test the shock absorbers.
8. If everything works correctly, you have successfully replaced your DC66-00470A Samsung Washer Shock Absorber!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
1. Start by unplugging the washer from its power source.
2. Lift the top of the washer and take off any screws securing the housing.
3. Remove the control panel by taking out any screws that may be holding it in place.
4. Locate the shock absorbers and remove any screws holding them in place.
5. Pull the old shock absorbers out, then insert the new ones.
6. Put all screws back in place and replace the housing and control panel.
7. Plug the washer back in and test the shock absorbers.
8. If everything works correctly, you have successfully replaced your DC66-00470A Samsung Washer Shock Absorber!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
