DC64-03483B Samsung Door Handle
DC64-03483B Samsung Door Handle
Weight : 0.000000 lbs
DC64-03483B Samsung Door Handle
Weight : 0.000000 lbs
Write Your Own Review
1. Before starting, make sure the door is completely shut and that you have the necessary tools and parts.
2. Unplug the power to the washer.
3. Open the door and unscrew the two screws located at the bottom of the handle.
4. Lift the handle off of the door, pulling straight up.
5. Remove the old handle, being careful not to damage any wiring or plastic tabs attached to it.
6. Attach the new Samsung DC64-03483B HANDLE DOOR; WV55M9600AV, ABS, T to the door in the same manner as the old one.
7. Securely fasten the handle to the door by screwing in the two screws at the bottom.
8. Re-apply power to the washer and test the new handle.
9. Once complete, double check all screws are tightened and all wiring is secure.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
2. Unplug the power to the washer.
3. Open the door and unscrew the two screws located at the bottom of the handle.
4. Lift the handle off of the door, pulling straight up.
5. Remove the old handle, being careful not to damage any wiring or plastic tabs attached to it.
6. Attach the new Samsung DC64-03483B HANDLE DOOR; WV55M9600AV, ABS, T to the door in the same manner as the old one.
7. Securely fasten the handle to the door by screwing in the two screws at the bottom.
8. Re-apply power to the washer and test the new handle.
9. Once complete, double check all screws are tightened and all wiring is secure.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
