DC31-00054A Samsung Washer Drain Pump

100% Guaranteed genuine parts logo
Part #: SMG DC31-00054A
100% Guaranteed genuine parts logo
Drain pump works with some Samsung models of washing machines.

Weight : 0.5547 lbs
Dimension : 5.1574 x 4.1732 x 3.5826
$139.01
In stock
Drain pump works with some Samsung models of washing machines.

Weight : 0.5547 lbs
Dimension : 5.1574 x 4.1732 x 3.5826
Write Your Own Review
Only registered users can write reviews. Please Sign in or Create an account

The following parts are replaced by this product

  1. DC31-00054A
How to Replace the DC31-00054A Samsung Washer Drain Pump

Replacing the drain pump in your Samsung washer is necessary when it becomes faulty. This guide will show you how to easily replace a faulty DC31-00054A Samsung Washer Drain Pump. Before beginning, make sure that you have all of the necessary tools on hand as well as a replacement DC31-00054A Samsung washer drain pump.

Step 1: Unplug the Washer

Before you begin to work on the washer, make sure to unplug it from the wall outlet. This will prevent any electrical hazards from occurring.

Step 2: Remove the Bottom Panel

Your Samsung washer will have a bottom panel that needs to be removed in order to access the drain pump. Locate the screws or clips holding the panel in place, then remove them. Carefully pull the panel away from the washer and set it aside for now.

Step 3: Remove the Old Pump

Once you have access to the pump, you will need to disconnect the hoses from the pump. Use an adjustable wrench to loosen the hose clamps and gently remove the hoses. Now, use a screwdriver to remove the screws holding the pump to the washer. Gently lift the pump out of the washer and set it aside.

Step 4: Install the New Pump

Now that the old pump has been removed, you can install the new one. Put the new pump in place and use the screws to secure it. Then, reattach the hoses using the hose clamps. Make sure the clamps are tight to prevent any leaks.

Step 5: Test the Washer

Once the new pump is installed, you can plug the washer back in and turn it on. Run a small test cycle to make sure that the pump is functioning correctly. If all is well, you can move on to the next step.

Step 6: Replace the Bottom Panel

Reattach the bottom panel to the washer with the screws or clips. Make sure the panel is securely fastened before moving on.

Your Samsung washer should now be functioning properly with its new DC31-00054A Samsung Washer Drain Pump. Enjoy the benefits of a reliable washer with this easy DIY guide.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Compatible with samsung